欢迎访问沈阳真空杂志社 Email Alert    RSS服务

真空 ›› 2019, Vol. 56 ›› Issue (6): 27-29.doi: 10.13385/j.cnki.vacuum.2019.06.05

• • 上一篇    下一篇

316LN异型真空盒超高真空表面处理工艺的研究*

邢银龙1,2, 吴杰峰1, 刘志宏1, 李波1, 周能涛1   

  1. 1.中国科学院等离子体物理研究所,安徽 合肥 230031;
    2.中国科学技术大学,安徽 合肥 230036
  • 收稿日期:2018-11-07 出版日期:2019-11-25 发布日期:2019-12-03
  • 通讯作者: 吴杰锋,研究员,博导。
  • 作者简介:邢银龙(1988-),安徽省合肥市人,博士生。
  • 基金资助:
    新型高密度等离子体发生源研究与实验(11305217)

Study on the Technology of Ultrahigh Vacuum Surface Treatment in 316LN Special-Shaped Vacuum Box

XING Yin-long1,2, WU Jie-feng1, LIU Zhi-hong1, BO Li1, ZHOU Neng-tao1   

  1. 1.Institute of Plasma Physics Chinese Academy of Sciences, Hefei 230031, China;
    2.Institute of Plasma Physics Chinese Academy of Sciences, Hefei 230036, China
  • Received:2018-11-07 Online:2019-11-25 Published:2019-12-03

摘要: 第三代同步辐射光源在不同位置需要设计不同形状的真空腔体保证电子束在超高真空(<1.3×10-8Pa)环境下运行。其中异型真空腔体作为第三代同步辐射装置的关键部件之一其制造过程中非常关键问题就是材料的表面处理。然而,针对316LN异型真空盒超高真空的表面处理工艺国内外还没有公开的发表过,对于316LN异型真空盒超高真空的表面处理工艺的研究工作也鲜有报道。因此,本文针对316LN异型真空盒超高真空表面处理工艺提出合理的工艺方案,针对316LN异型真空盒的表面处理工艺设计并组建一套完整的四极质谱残余气体检测分析系统,为316LN异型真空盒超高真空表明处理的研究提供理论依据。

关键词: 异型真空盒, 超高真空, 表面处理, 工艺

Abstract: The third-generation synchrotron requires to design a vacuum box with different shapes at different locations to ensure that the electron beam operates in an ultrahigh vacuum (<1.3E-8Pa) environment. As one of the key parts of the third-generation synchrotron device, the surface treatment of the material is the key problem in the manufacturing process. However, the surface treatment technology for 316LN special-shaped vacuum box of ultrahigh vacuum has not been published at home and abroad, and the research on the surface treatment technology of 316LN special-shaped vacuum box of ultrahigh vacuum has rarely been reported. Therefore, this paper puts forward a reasonable process plan for 316LN special-shaped vacuum box of ultrahigh vacuum surface treatment process, and designs and sets up a complete set of four-pole mass spectrometry residual gas detection and analysis system for 316LN special-shaped vacuum box of ultrahigh vacuum surface treatment process. It provides a theoretical basis for the study of the treatment of 316LN type vacuum box with ultra-high vacuum indication.

Key words: special-shaped vacuum box, ultra high vacuum, surface treatment, technological

中图分类号: 

  • TB77
[1] 毕拉力·木乎提江, 阿力甫江·扎依提. 同步辐射光源及其特点[J]. 新疆师范大学学报, 2015,35(4):53-54.
[2] 杨宏. BEPCⅡ储存环真空盒的焊接[J]. 电焊机, 2007,37(1):66-69.
[3] 徐福兴,杨凯,等. 四极杆电极系统的应用与研究进展[J]. 质谱学报, 2015,36(6):482-484.
[4] 赵向阳. 奥氏体不锈钢设备的化学清洗和钝化[J]. 清洗世界, 2007,23(5):17-18.
[5] Walter Umrath.Fundamental of Vacuum Technology. 2007.
[6] 董海义,李琦,等. BEPCII 储存环真空系统性能[J]. 真空, 2008,45(4):30-31.
[7] 吕振华. 水基金属清洗剂的技术研究进展[J].新材料与新技术,2018,44(8):67.
[8] 杨振龙.机械加工之清洗工艺浅探[J].青海教育, 2018,11-12:39.
[9] 冯志良,赵金玉,等. 电真空器件烘烤排气过程中残余气体质谱分析[J]. 真空科学与技术学报, 2014,34(4):326-328.
[10] 成永军,李得天,等. 超高真空校准室内残余气体的成分分析[J]. 真空科学与技术学报, 2010,30(1):57-58.
[1] 王博锋 , 胡旭华 , 周冠丽 , 李宏宇 , 周健勇 , 王小霞 , 张兆传 . 微波管电子枪真空除气系统设计[J]. 真空, 2019, 56(1): 6-10.
[2] 李得天, 成永军, 张虎忠, 孙雯君, 王永军, 孙 健, 李 刚, 裴晓强. 碳纳米管场发射阴极制备及其应用研究[J]. 真空, 2018, 55(5): 1-9.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 李得天, 成永军, 张虎忠, 孙雯君, 王永军, 孙 健, 李 刚, 裴晓强. 碳纳米管场发射阴极制备及其应用研究[J]. 真空, 2018, 55(5): 1 -9 .
[2] 周彬彬, 张 建, 何剑锋, 董长昆. 基于 CVD 直接生长法的碳纳米管场发射阴极[J]. 真空, 2018, 55(5): 10 -14 .
[3] 李志胜. 空间环境下超大型红外定标用辐射屏蔽门的研制[J]. 真空, 2018, 55(5): 66 -70 .
[4] 郑 列, 李 宏. 200kV/2mA 连续可调直流高压发生器的设计[J]. 真空, 2018, 55(6): 10 -13 .
[5] 柴晓彤, 汪 亮, 王永庆, 刘明昆, 刘星洲, 干蜀毅. 基于 STM32F103 单片机的单泵运行参数数据采集系统[J]. 真空, 2018, 55(5): 15 -18 .
[6] 孙立志, 闫荣鑫, 李天野, 贾瑞金, 李 征, 孙立臣, 王 勇, 王 健, 张 强. 放样氙气在大型收集室内分布规律研究[J]. 真空, 2018, 55(5): 38 -41 .
[7] 黄 思 , 王学谦 , 莫宇石 , 张展发 , 应 冰 . 液环压缩机性能相似定律的实验研究[J]. 真空, 2018, 55(5): 42 -45 .
[8] 纪 明, 孙 亮, 杨敏勃. 一种用于对月球样品自动密封锁紧的设计[J]. 真空, 2018, 55(6): 24 -27 .
[9] 李民久, 熊 涛, 姜亚南, 贺岩斌, 陈庆川. 基于双管正激式变换器的金属表面去毛刺 20kV 高压脉冲电源[J]. 真空, 2018, 55(5): 19 -24 .
[10] 刘燕文, 孟宪展, 田 宏, 李 芬, 石文奇, 朱 虹, 谷 兵, 王小霞 . 空间行波管极高真空的获得与测量[J]. 真空, 2018, 55(5): 25 -28 .