VACUUM ›› 2024, Vol. 61 ›› Issue (6): 54-60.doi: 10.13385/j.cnki.vacuum.2024.06.10
• Vacuum Metallurgy and Thermal Engineering • Previous Articles Next Articles
LI Li-hang, FU Peng-fei, TANG Zhen-yun, MAO Zhi-yong
CLC Number: TG406
| [1] PATTERSON T, HOCHANADEL J, SUTTON S, et al.A review of high energy density beam processes for welding and additive manufacturing applications[J]. Welding in the World, 2021, 65(7): 1235-1306. [2] 万松林. 电子束焊接与加工技术现状及其在国内船舶领域的应用进展[J]. 材料开发与应用, 2018, 33(5): 112-120. [3] 陈健, 冷冰, 郑红, 等. 氦气保护超低真空电子束焊接束流散射及焊缝形貌分析[J]. 焊接学报, 2019, 40(2): 68-72. [4] 许启晋. 局部真空电子束焊接技术的发展[J]. 真空与低温, 1988(2): 50-56. [5] ANGELINI S, CUCCHI G, MOSTACCI D.Evaluation of the radiological hazard in electron beam welding[J]. Radiation Effects and Defects in Solids, 2021, 176(1/2): 92-99. [6] SANDERSON A, PUNSHON C S, RUSSELL J D.Advanced welding processes for fusion reactor fabrication[J]. Fusion Engineering and Design, 2000, 49: 77-87. [7] WYKES M, PUNSHON C, JONES L, et al.All-position reduced pressure electron beam welding for large fusion containment vessels[J]. Fusion Engineering & Design, 2001, 58: 793-796. [8] 何成旦, 成永军, 应磊, 等. 法兰环缝局部真空电子束焊接技术研究[J]. 核技术, 2002, 25(9): 749-754. [9] 张益坤, 刘景铎. 壳段法兰局部真空电子束焊机的特点及使用[J]. 电焊机, 2005, 35(7): 43-45. [10] LAWLER S, CLARK D, PUNSHON C, et al.Local vacuum electron beam welding for pressure vessel applications[J]. Ironmaking & Steelmaking Products & Applications, 2015,42(10): 722-726. [11] 黄彩艳, 陈俐. 高能束焊接系统及应用技术研究新进展[J]. 焊接, 2019(10): 31-37. [12] PUNSHON C S, SANDERSON A.Development of local vacuum, mobile seal technology for the application of electron beam welding to massive structures[J]. DVS-Berichte, International Electron Beam Welding (IEBW) Conference, 2012, 285: 14-21. [13] 刘志华, 雷学锋, 赵兵, 等. 铝合金局部真空电子束焊接工艺研究[J]. 核技术, 2002, 25(9): 755-757. [14] 邱泽浩, 车军, 刘潇潇. 非真空电子束钢轨焊接装置的设计[J]. 热加工工艺, 2022, 51(7): 137-140. [15] BALAKRISHNAN J, VASILEIOU A N, FRANCIS J A, et al.Residual stress distributions in arc, laser and electron-beam welds in 30 mm thick SA508 steel: a cross-process comparison[J]. International Journal of Pressure Vessels & Piping, 2018, 162: 59-70. [16] VASILEIOU A N, SMITH M C, FRANCIS J A, et al.Development of microstructure and residual stresses in electron beam welds in low alloy pressure vessel steels[J]. Materials & Design, 2021, 209: 109924. [17] FENG G, WANG Y, LUO W, et al.Comparison of welding residual stress and deformation induced by local vacuum electron beam welding and metal active gas arc welding in a stainless steel thick-plate joint[J]. Journal of Materials Research and Technology, 2021, 13: 1967-1979. [18] 胡兴, 彭昭成, 冯广杰, 等. SUS310S不锈钢局部真空电子束焊接接头残余应力及变形研究[J]. 机械工程学报, 2020, 56(21): 38-47. [19] 胡兴. 面向工程应用的厚大钢结构焊接残余应力高效计算方法开发[D]. 重庆: 重庆大学, 2020. [20] PUNSHONA R N C, MCARTHURB J. Development, qualification and production analysis of local vacuum power beam welding in heavy fabrication for low carbon energy application[C]//The 76th IIW Annual Assembly and International Conference on Welding and Joining. Singapore, 2023: 581-586. [21] PUNSHON C S.Reduced-pressure, local-vacuum electron beam welding system commisision and initial welding trials[R] Member Report 965/2010, 2010. [22] 刘许勋. 高压电子束焊机室外动枪设计及其密封性能分析[D]. 厦门:厦门理工学院, 2021. |
| [1] | XING Yin-long, WU Jie-feng, PEI Shi-lun, LIU Zhi-hong, LI Bo, LIU Zhen-fei, MA Jian-guo. Vacuum Electron Beam Welding of Semi-Y-state Oxygen Free Copper Plate in Boat Shape RF Cavity [J]. VACUUM, 2022, 59(5): 69-73. |
|