欢迎访问沈阳真空杂志社 Email Alert    RSS服务

真空 ›› 2021, Vol. 58 ›› Issue (2): 52-57.doi: 10.13385/j.cnki.vacuum.2021.02.11

• 真空获得与设备 • 上一篇    下一篇

热压机喷射性能计算及探究

徐慧强, 宗诚, 王焱庆, 许恒, 陈玉翔   

  1. 中国船舶重工集团公司第七三研究所,黑龙江 哈尔滨,150078
  • 收稿日期:2020-01-19 出版日期:2021-03-25 发布日期:2021-04-09
  • 通讯作者: 陈玉翔,研究员。
  • 作者简介:徐慧强(1989-),男,黑龙江省佳木斯市人,工学博士,高级工程师。

Calculation Method and Analysis on Thermal Compressor Ejection Characteristics

XU Hui-qiang, ZONG Cheng, WANG Yanqing, XU Heng, CHEN Yu-xiang   

  1. No. 703 Research Institute of China Shipbuilding Industry Corporation, Harbin 150078, China
  • Received:2020-01-19 Online:2021-03-25 Published:2021-04-09

摘要: 热压机技术作为电站灵活性改造的重要手段,其极限喷射能力的大小对电站改造方案的可行性评估意义重大。本文通过对热压机内部涉及的物理过程进行理论推导,建立了计算热压机可达最大喷射系数的理论模型。研究结果表明,当前计算模型可以很好地描述热压机的喷射能力,在最大喷射系数的计算方面具备较高的精度和适用性。与此同时,模型计算结果表明,热压机喷射能力随工作蒸汽和引射蒸汽压力的增加而增大,随压缩蒸汽压力的增加而减小;工作蒸汽过热度的增加对喷射能力的提升起积极作用,而引射蒸汽的过热度变化不会引起喷射能力出现显著改变。

关键词: 热压机, 喷射系数, 理论模型, 性能分析

Abstract: The utilization of thermal compressors is an important way to exceed flexibility transformation of thermal power plants. The extreme ejection ability of thermal compressors is significant for the feasibility evaluation of transformation strategy. The present research conducts theoretical derivation of the related physical process inside the thermal compressor and builds a theoretical model for calculating the maximum entrainment ration. The results show that the present model can describe the ejection ability of the thermal compressor with satisfactory accuracy and application scope. Moreover, the results of the model calculation indicate that the ejection ability is enhanced with the increase of primary and suction steam pressure, but weakened by the increase of compressed steam pressure. The increase of primary steam pressure will promote the increase of entrainment ration while suction steam pressure does not affect the ejection ability.

Key words: thermal compressor, entrainment ratio, theoretical model, performance analysis

中图分类号: 

  • TK123
[1] 宋煜. 热力蒸汽压缩器性能计算方法研究[D]. 大连: 大连理工大学, 2010.
[2] 陈金增, 宋振海, 张青枝, 等. 热力蒸汽压缩式海水淡化系统热力分析[J]. 海军工程大学学报, 2005, 17(4): 60-63.
[3] 董景明, 王威宁, 郭阳, 等. 热力压缩海水淡化系统中低温蒸汽喷射器的实验研究[J]. 科学技术与工程, 2018, 18(16): 22-25.
[4] 季建刚, 王如竹, 黎立新. 蒸汽喷射压缩器特性计算与分析[J]. 船舶工程, 2006, 28(5): 46-49.
[5] 沈胜强, 李素芬, 夏远景. 喷射式热泵的设计计算与性能分析[J]. 大连理工大学学报, 1998(5): 66-69.
[6] 华敏. 蒸汽喷射器特性的CFD分析与节能应用研究[D]. 南京: 南京工业大学, 2005.
[7] 陈小康. 拉瓦尔喷嘴应用于蒸汽喷射式热泵性能分析[J]. 化工装备技术, 2018, 39(2): 29-33.
[8] 徐海涛, 桑芝富. 蒸汽喷射式热泵变工况性能分析[J]. 热能动力工程, 2003, 18(4): 395-398.
[9] 高淼. 蒸汽喷射器理论及数值模拟分析[D]. 沈阳: 东北大学, 2013.
[10] 徐鑫, 丁学俊, 许弘雷, 等. 蒸汽喷射器流场模拟及性能优化分析[J]. 流体机械, 2015(5): 49-54.
[11] 陶乐仁, 王永红, 王金锋, 等太阳能喷射式空调系统中喷射系数的计算方法的探讨[J]. 制冷技术, 2016, 37(6): 37-40.
[12] ZHU Y, CAI W, WEN C, et al.Numerical investigation of geometry parameters for design of high performance ejectors[J]. Applied Thermal Engineering, 2009, 29(5-6): 898-905.
[13] 王颖. 几种喷射器设计方法比较和喷射器设计及性能分析一体化软件开发[D]. 南宁: 广西大学, 2015.
[14] 王权, 向雄彪. 蒸汽喷射压缩器喷射系数计算方法研究[J]. 太阳能学报, 1997(3): 314-321.
[15] 徐海涛. 蒸汽喷射器的理论及数值研究[D]. 南京: 南京工业大学, 2003.
[16] HISHAM E D, ETTOUNEY H, ALATIQI I, et al.Evaluation of steam jet ejectors[J]. Chemical Engineering & Processing Process Intensification, 2002, 41(6): 551-561.
[17] 张琦, 庞世充, 王汝武. 蒸汽喷射器理论计算及设计软件开发[J]. 流体机械, 2012(8): 49-52.
[18] PARK I S, PARK S M, HA J S.Design and application of thermal vapor compressor for multi-effect desalination plant[J]Desalination, 2005, 182: 199-208.
[19] 傅冠桦. 喷射器数值模拟及喷射特性的研究[D]. 大连: 大连理工大学, 2014.
[20] ARNOLD H G, HUNTLEY W R, BLANCO H P.Steam ejector as an industrial heat pump[J]. ASHRAE Trans, 1982(88): 845-857.
[1] 陈 文, 王贤友. 磁控管散热技术研究及其性能改善方法[J]. 真空, 2019, 56(1): 63-66.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!