电极感应气雾化法制备3D打印用TC4粉末增氧量研究

doi:10.13385/j.cnki.vacuum.2020.06.17

VACUUM ›› 2020, Vol. 57 ›› Issue (6): 80-83.doi: 10.13385/j.cnki.vacuum.2020.06.17

• 3D Printing Technology • Previous Articles Next Articles

Study on Oxygenation Amount of TC4 Powder for 3D Printing Prepared by Electrode Induction Gas Atomization

XIE Bo¹, LI Jian-jun², QIAO Zhong-lu²

1.State Key Laboratory of Vanadium and Titanium Resources Comprehensive Utilization, Pangang Group Research Institute Co., Ltd., Panzhihua 617000, China;
2.Shenyang Vacuum Technology Institute Co., Ltd., Shenyang 110042, China

Received:2019-06-07 Online:2020-11-25 Published:2020-11-30

Abstract

Abstract: The TC4 alloy powder for 3D printing was prepared using an electrode induction smelting gas atomization method (EIGA) apparatus, and the oxygen content of the powder was measured using an oxygen-nitrogen hydrogen analyzer. In this paper, the effects of vacuum degree, pressure increase rate and screening atmosphere on the oxygenation amount of TC4 powder were studied. The results show that effect on oxygenation amount of TC4 powder follows pressure increase rate>screening atmosphere>equipment vacuum. When equipment vacuum degree is 0.01Pa, pressure increase rate is 0.67Pa/h, sieved in glove box, the oxygenation amount of 15-53μm TC4 powder is 167 ppm.

Key words: oxygenation amount, TC4 powder, EIGA, 3D printing

CLC Number:

TG146.2

XIE Bo, LI Jian-jun, QIAO Zhong-lu. Study on Oxygenation Amount of TC4 Powder for 3D Printing Prepared by Electrode Induction Gas Atomization[J].VACUUM, 2020, 57(6): 80-83.

References 7

[1]	Singh S, Ramakrishna S, Singh R.Material issues in additive manufacturing: A review[J]. Journal of Manufacturing Processes, 2017, 25:185-200.
[2]	廖先杰, 赖奇, 张树立. 球形钛及钛合金粉制备技术现状及展望[J]. 钢铁钒钛, 2017, 38(5):1-8.
[3]	Seifi M, Salem A, Beuth J, et al.Overview of materials qualification needs for metal additive manufacturing[J]. JOM, 2016, 68(3):747-764.
[4]	陆亮亮, 张少明, 徐骏,等. 球形钛粉先进制备技术研究进展[J]. 稀有金属, 2017(1):94-101.
[5]	杨启云, 吴文恒, 张亮,等. EIGA雾化法制备3D打印用Ti6Al4V合金粉末[J]. 粉末冶金工业, 2018,28(3):8-12.
[6]	Chen G, Zhao S Y, Tan P, et al.A comparative study of Ti-6Al-4V powders for additive manufacturing by gas atomization, plasma rotating electrode process and plasma atomization[J]. Powder Technology, 2018,333:38-46.
[7]	Wei W Z, Wang L Z, Chen T, et al.Study on the flow properties of Ti-6Al-4V powders prepared by radio-frequency

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

Comments

Recommended 0

No Suggested Reading articles found!

Study on Oxygenation Amount of TC4 Powder for 3D Printing Prepared by Electrode Induction Gas Atomization

Abstract

Cite this article

share this article

References 7

Related Articles 2

Metrics

Comments

Recommended 0

[1]	ZHAO Teng-jiao, JIN Nan, LIN Bin, WANG Zhi-guo. Application Research of SLM Metal 3D Printing Technology in Main Pump Prototype Test [J]. VACUUM, 2019, 56(6): 64-67.
[2]	TIAN Tong-tong, LI Lun, ZHOU Bo, ZHAO Ji-bin. Research on Color 3D Printing Slice Technology [J]. VACUUM, 2019, 56(6): 75-79.