欢迎访问沈阳真空杂志社 Email Alert    RSS服务

真空 ›› 2021, Vol. 58 ›› Issue (3): 71-76.doi: 10.13385/j.cnki.vacuum.2021.03.14

• 真空冶金与热工 • 上一篇    下一篇

钛合金真空自耗熔炼中的风险识别及预防措施

王资璐1, 郝孟一1, 李臻熙1, 李建军2, 侯景岳2   

  1. 1.中国航发北京航空材料研究院,北京 100095;
    2.沈阳真空技术研究所有限公司,辽宁 沈阳 110042
  • 收稿日期:2020-06-29 出版日期:2021-05-25 发布日期:2021-06-01
  • 作者简介:王资璐(1988-),男,山东省烟台市人,硕士,工程师。

Risk Identification and Precaution of Vacuum Consumable Melting for Titanium Alloys

WANG Zi-lu1, HAO Meng-yi1, LI Zhen-xi1, LI Jian-jun2, HOU Jing-yue2   

  1. 1. AECC Bejing Institute of Aeronautical Materials, Beijing 100095, China;
    2. Shenyang Vacuum Technology Institute Co., Ltd., Shenyang 110042, China
  • Received:2020-06-29 Online:2021-05-25 Published:2021-06-01

摘要: 在高温下,钛的活性迅速增加,可与许多物质发生剧烈反应。目前高品质钛合金的主流熔炼工艺为在真空或惰性气氛保护下的三次真空自耗熔炼。在熔炼过程中,钛合金溶液的熔池温度可达1750℃以上,必须对铜坩埚、电极杆、炉体等设备重要部位通水冷却。在实际的大规模生产中,容易因操作不当、设备故障等原因引起设备冷却水漏进坩埚,与钛合金溶池接触后发生爆炸,造成人员伤亡和财产损失。本文结合实际生产和设备管理经验,总结了真空自耗熔炼炉的危险因素,分析了对应的预防措施。

关键词: 钛合金, 真空自耗熔炼炉, 企业职工伤亡事故分类, 预防措施

Abstract: The activity of titanium increases rapidly by the elevation of temperature, and it tends to react with various material intensively at high temperature. Currently, the predominate melting technique of high quality titanium alloys is the 3 times vacuum consumable melting protected by vacuum or inert gas. The temperature of titanium alloy liquid is above 1750 ℃, thus the use of cooling water is necessary to protect the important devices such as copper crucible, electrode rod and furnace body. Under improper handling or equipment fault conditions, the cooling water may flow into the crucible and react with the hot titanium alloy liquid. In practical mass production, severe explosion may occur, which will lead to casualty and property losses. The current work is based on mass production and equipment management experience. Potential risks of the design of vacuum consumable melting device is identified, and precautions are systematically analyzed in this paper.

Key words: titanium alloy, VAR, classification of casualty accidents of enterprise employees, preventive measures

中图分类号: 

  • TB79
[1] 杨欢, 杨晓康, 杜晨, 等. 钛及钛合金真空熔炼技术研究进展[J]. 世界有色金属, 2019(4): 1-6.
[2] 雷文光, 赵永庆, 韩栋, 等. 钛及钛合金熔炼技术发展现状[J]. 材料导报, 2016(30): 101-106.
[3] 刘欣欣. 真空自耗电弧熔炼制备钛合金技术的研究进展[J]. 工业加热, 2019(48): 67-69.
[4] HAFID E M, ALAIN J, BELLOT J P, et al.Thermal behaviour of the consumable electrodein the vacuum arcremelting process[J]. Journal of Materials Processing Technology, 2010, 210: 564-572.
[5] 张文政. 真空自耗炉熔炼钛时发生爆炸的原因分析[J]. 工业炉, 2015(37): 54-56.
[6] 李春玉. 基于PLC的真空自耗炉控制系统设计[D]. 西安: 西安理工大学, 2019.
[7] 李会武, 彭常户, 杜亚宁, 等. 大吨位双炉室真空自耗电弧炉的研制[J]. 钛工业进展, 2018(35): 38-41.
[8] 卢新昌. 影响VAR炉熔炼安全的因素及对策[J]. 真空, 2004(41): 83-88.
[9] 姬向锋. 由一例真空自耗电弧炉保护跳闸事件谈辅助电极锁紧结构的演进与发展[J]. 真空科学与技术学报, 2019(39): 350-353.
[10] 莫畏, 邓国珠, 罗方承. 钛合金:第2版[M]. 北京: 冶金工业出版社, 1998.
[11] 王伟. 钛及钛合金真空自耗熔炼生产远程监控系统研究[D]. 西安: 西安石油大学, 2018.
[12] BORODIN A A, KABULOVA E G, POLOZHENTSEV K A.Method for determining the deviations of technological process for remelting the consumable electrodes in a vacuum arc furnace by the video image[J]. Izvestiya Vysshikh Uchebnykh Zavedenij Chernaya Metallurgiya, 2016, 59(5): 318-321.
[13] 陈军, 忽晓伟, 张静. 真空自耗电弧炉系统优化控制策略研究[J]. 自动化仪表, 2020(41): 46-50.
[14] 张飞奇, 孙宝洋, 李晗嫣. TA15 钛合金真空自耗电弧熔炼过程中的富钛偏析研究[J]. 钛工业进展, 2019(36): 38-41.
[15] 袁红, 王资璐, 董颖, 等. MLS评价法在真空自耗电弧炉危险性评价中的应用[J]. 安全、健康、环境, 2015(15): 42-45.
[1] 孔源, 张海鸥, 高建成, 陈曦, 王桂兰. 金属激光熔化沉积过程双时间步长法多尺度物理耦合场的数值模拟*[J]. 真空, 2020, 57(4): 77-84.
[2] 刘灵云, 林松盛, 王迪, 李风, 代明江, 石倩, 韦春贝. CrAlN抗冲蚀涂层制备及性能研究*[J]. 真空, 2020, 57(2): 40-46.
[3] 张英伟, 李晓丹, 高郑宇, 倪家强, 刘艳梅, 李建中. 激光选区熔化TC4钛合金高氯酸电解抛光工艺研究*[J]. 真空, 2020, 57(2): 78-82.
[4] 王迪, 林松盛, 刘灵云, 杨洪志, 蒋百灵, 薛玉娜, 周克崧. 表面处理技术对钛合金疲劳性能影响的研究进展*[J]. 真空, 2019, 56(6): 36-42.
[5] 宋青竹, 董辉, 鄂东梅, 王玲玲, 张宁, 乔忠路. 电磁悬浮真空熔铸技术进展[J]. 真空, 2019, 56(6): 43-48.
[6] 宋青竹, 张哲魁, 孙足来, 鄂东梅. 大型钛合金熔铸技术——真空电弧凝壳精铸设备进展[J]. 真空, 2018, 55(5): 58-61.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!