欢迎访问沈阳真空杂志社 Email Alert    RSS服务

真空 ›› 2022, Vol. 59 ›› Issue (2): 17-20.doi: 10.13385/j.cnki.vacuum.2022.02.04

• 测量与控制 • 上一篇    下一篇

高精度梯度控温系统应用研究

孙成恺, 刘海静, 路同山, 李灿伦, 李卓慧, 高泽天, 王国防   

  1. 上海卫星装备研究所,上海 200240
  • 收稿日期:2021-05-21 出版日期:2022-03-25 发布日期:2022-04-14
  • 作者简介:孙成恺(1987-),男,河南省新乡市人,硕士,工程师。

Application Research of High Precision Gradient Temperature Control System

SUN Cheng-kai, LIU Hai-jing, LU Tong-shan, LI Can-lun, LI Zhuo-hui, GAO Ze-tian, WANG Guo-fang   

  1. Shanghai Institute of Spacecraft Equipment, Shanghai 200240, China
  • Received:2021-05-21 Online:2022-03-25 Published:2022-04-14

摘要: 为满足某型号航天产品热真空试验中梯度控温需求,设计了一套高精度梯度控温系统。系统由热沉、加热器及配套的控温系统等组成,可实现载荷等产品梯度控温需求,控温精度可达±0.2℃。本文介绍了该系统控温结构的设计、温控结构框架、PID控温原理。采用该系统对产品分区进行梯度控温试验,试验中系统运行稳定可靠,结果表明该系统满足产品分区梯度控温需求,控温精度高。

关键词: 热真空试验, 梯度控温, PID控温

Abstract: In order to meet the requirement of gradient temperature control in the thermal vacuum test of a certain type of aerospace products, a set of high precision gradient temperature control system was designed. The system is composed of heat sink, heater and supporting temperature control system, etc., which can meet the gradient temperature control requirements of products such as load, and the temperature control precision can reach ±0.2℃. This paper introduces the design of the temperature control structure, the frame of the temperature control structure and the PID temperature control principle of the system. The system is used to test the gradient temperature control in product zones, and it runs stably and reliably in the test. The experimental results show that the system can meet the requirements of gradient temperature control in product zones, and the temperature control accuracy is high.

Key words: thermal vacuum test, gradient temperature control, PID control

中图分类号: 

  • V416.5
[1] 滕健, 叶海峰, 汪韩送, 等. 一种热真空试验设备的研制[J]. 低温技术, 2016, 44(12): 16-21.
[2] 陈立涛, 张伟. 热真空试验系统温度均匀度试验研究[J]. 环境技术, 2016, 34(3): 21-23.
[3] 杨冬甫. 热真空试验技术与设备发展概述[J]. 中国仪器仪表, 2008(9): 75-78.
[4] DONG H Y, SONG H, LI Q, et al.The vacuum system of the China spallation neutron source[J]. Vacuum, 2018, 154: 75-81.
[5] 祁松松, 徐晓辉, 刘家林, 等. 热真空试验设备控温热沉设计分析[J]. 真空, 2020, 57(2): 62-65.
[6] 张蕊, 景加荣, 季琨, 等. 宽温区高均匀度热沉调温系统设计与实现[J]. 低温工程, 2018(6): 37-40.
[7] ASHWINDRAN S N,AZIZUDDIN A A.Design of small thermal vacuum chamber for 125-U CubeSat staellite[J]. IOP Conference Series:Materials Science and Engineering[C]. 2019(469): 012108
[8] 刘强. 对热真空环境模拟试验设备设计中有关问题的讨论[J]. 真空与低温, 2006, 12(4): 238-245.
[9] 黄光萍. 热真空设备中与温度相关的试验技术探讨[J]. 环境技术, 2021, 2(1): 21-26.
[10] 黄本诚, 徐加宽. 载人航天器真空热试验技术探讨[J]. 航天器环境工程, 2001(4): 1-7.
[11] 何异舟. 小卫星技术与产业发展研究[J]. 电信网技术, 2017(10): 29-33.
[12] 徐志明. 小卫星高精度热控方法研究[D]. 合肥: 中国科学技术大学, 2018.
[13] 承磊. 液氮/冷氦气双冷源高低温箱试验和模拟研究[D]. 上海: 上海交通大学, 2015.
[14] 晏亭太. 智能自适应PID/PD控制器设计及仿真研究[D]. 哈尔滨: 哈尔滨工业大学, 2014.
[15] 刘敏层, 杨子毛, 李阳, 等. 一种优化的PID算法在伺服跟踪系统中的应用[J]. 电气传动, 2016, 46(7): 16-19.
[16] 彭光东, 齐晓军, 陈丽, 等. KM5A 空间环境试验设备研制[J]. 航天器环境工程, 2010, 27(4): 485-488.
[17] 赵晶辉, 杨建斌, 刘伟成, 等. 板式热沉温度均匀性仿真研究[J]. 真空与低温, 2018, 24(5): 321-326.
[18] 李荣, 吕刚. 模糊控制的热真空环境模拟设备研究[J]. 电气传动自动化, 2009, 31(5): 26-28.
[19] 简亚彬, 张春元, 丁文静, 等. 调温热沉设备的状态空间法仿真设计[J]. 航天器环境工程, 2008, 25(4): 81-84.
[20] 柯受全. 卫星环境工程和模拟试验[M]. 北京: 中国宇航出版社, 2009.
[1] 祁松松, 徐晓辉, 刘家林, 张蕊, 李灿伦, 董德胜, 施承天. 热真空试验设备控温热沉设计分析[J]. 真空, 2020, 57(2): 62-65.
[2] 王飞, 景加荣, 李灿伦, 齐晓军. 深空探测器真空热环境模拟试验系统[J]. 真空, 2019, 56(3): 16-20.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 李得天, 成永军, 张虎忠, 孙雯君, 王永军, 孙 健, 李 刚, 裴晓强. 碳纳米管场发射阴极制备及其应用研究[J]. 真空, 2018, 55(5): 1 -9 .
[2] 郑 列, 李 宏. 200kV/2mA 连续可调直流高压发生器的设计[J]. 真空, 2018, 55(6): 10 -13 .
[3] 纪 明, 孙 亮, 杨敏勃. 一种用于对月球样品自动密封锁紧的设计[J]. 真空, 2018, 55(6): 24 -27 .
[4] 宋青竹, 张哲魁, 孙足来, 鄂东梅. 大型钛合金熔铸技术——真空电弧凝壳精铸设备进展[J]. 真空, 2018, 55(5): 58 -61 .
[5] 阮庆东, 蒲世豪, 陈 常, 魏于苹. 一种新型高能离子注入系统的加速电源研制[J]. 真空, 2018, 55(6): 14 -18 .
[6] 王晓冬, 吴虹阅, 张光利, 李 赫, 孙 浩, 董敬亮, TU Jiyuan. 计算流体力学在真空技术中的应用[J]. 真空, 2018, 55(6): 45 -48 .
[7] 李忠仁, 明 悦, 朱一鸣. 电阻加热真空高温石墨化炉的功率计算[J]. 真空, 2018, 55(6): 73 -75 .
[8] 尹沙沙, 彭润玲, 韦 妍, 曹 蔚, 王 宁. 真空冷冻干燥法制备纳米二硫化钼的实验研究[J]. 真空, 2018, 55(6): 80 -83 .
[9] 陈 博, 杨 飞, 李建昌. 柔性薄膜材料疲劳失效研究[J]. 真空, 2019, 56(1): 20 -26 .
[10] 张以忱. 第二十讲 真空离子镀膜[J]. 真空, 2019, 56(2): 78 -80 .