热等静压炉耐压试验升压时间的计算

doi:10.13385/j.cnki.vacuum.2025.03.04

Abstract

Abstract: Hot isostatic pressing furnace is a high-temperature and ultrahigh pressure equipment, the medium inside it stores a large amount of explosive equivalent energy, so its safety control is particularly important. In order to guide and implement the pressure tests, the force characteristics of pressure bearing parts and medium compression characteristics during tests were introduced. Taking the HIP1025 hot isostatic pressing furnace as an example, the pressure rising time of pressure tests was calculated, and feasible methods to shorten the pressure rising time and reduce operational risks were provided. An engineering calculation software was compiled to provide a tool for the parameterization, automation and digital management of pressure tests for ultrahigh pressure vessels.

Key words: HIP, ultrahigh pressure vessel, pressure test, pressure rising time

CLC Number: TH49;X933.4

LI Zhongren, YANG Hongshuai, WANG Ying, SONG Jiaxing, MA Yuanchen, ZHANG Wang, GU Yugang. Calculation of Rising Time for Pressure Test of Hot Isostatic Pressure Furnace[J].VACUUM, 2025, 62(3): 21-26.

References

[1] 国家质检总局特种设备安全监察局. 固定式压力容器安全技术监察规程: TSG 21-2016[S]. 北京:新华出版社, 2016.
[2] 周亮,周裕峰.在用超高压容器的定期检验[C]//第六届全国压力容器学术会议压力容器先进技术精选集. 杭州:中国机械工程学会, 2005.
[3] 全国锅炉压力容器标准化技术委员会.压力容器第一部分:通用要求: GB/T 150.1-2024[S].北京:中国标准出版社,2024.
[4] 郑津洋,桑芝富.过程设备设计[M].北京:化学工业出版社, 2020.
[5] 吴大声. 压力容器水压试验升压时间的计算[J]. 中国特种安全设备,2006,22(7):26-28.
[6] 王声宏, 陈宏霞,唐安清.等静压技术进展:第四届全国等静压学术论文集[C]. 北京:冶金工业出版社,1996.
[7] 杨勋烈. 热等静压[M].北京:冶金工业出版社, 1983.
[8] 昌曼丽. 热等静压设备的最新发展趋势[J].稀有金属与硬质合金, 1990(2):63-65.
[9] DAVIES S.HIPing-the process and its applications in materials manufacture[R]. HIP Processing of Materials for Aggressive Ervironments,Derby,2011.
[10] 刘慧渊,何如松,周武平,等. 热等静压技术的发展与应用[J].新材料产业,2010(11):12-17.
[11] 刘志国,千正男. 高压技术[M] .哈尔滨:哈尔滨工业大学出版社,2012.
[12] 陈国理,陈柏暖,王作池. 超高压容器设计[M]. 北京:化学工业出版社,1997.
[13] 全国锅炉压力容器标准化技术委员会.超高压容器: GB/T 34019-2017[S]. 北京:中国标准出版社, 2017.
[14] 黄燕茹. 250 MPa等静压成型超高压容器筒体结构设计及分析[D]. 秦皇岛:燕山大学,2012.
[15] 颜永年. 预应力钢丝缠绕超高压筒体的应力及变形分析[J]. 清华大学学报(自然科学版), 1978(2):86-110.
[16] 颜永年, 俞新陆. 机械设计中的预应力结构[M]. 北京:机械工业出版社,1989.
[17] CROSSLAND B, BONES J A.The behaviour of thickwalled steel cylinders subjected to internalpressure[J]. Proceeding of the Institution of Mechanical Engineers, 1955, 172: 777-804.
[18] MORRISON J L M, CROSSLAND B, PARRY J S C. Strength of thick cylinders subjected to repeatedinternal Pressure[J]. Proceedings of the Institution of Mechanical Engineers,1959, 174: 95-117.
[19] 邓晨曦,吴任东,颜永年,等. 大型承载框架钢丝预应力缠绕技术研究[J]. 新技术新工艺,2008(2):52-54.
[20] 全国锅炉压力容器标准化技术委员会. 承压设备用碳素钢和合金钢锻件: NB/T 47008-2017[S].北京:新华出版社, 2017.
[21] 姜桂良, 念远征, 杜瑞青.压力容器缠绕用扁钢丝生产工艺探讨[J].金属制品,2000,26(1):30-31.
[22] 张昊宇, 郑文忠. 1860级低松弛钢绞线高温下力学性能[J].哈尔滨工业大学学报,2007,39(6):861-865.
[23] 中石化上海工程有限公司.化工工艺设计手册[M]. 5版. 北京:化学工业出版社, 2018.
[24] 张家荣.赵廷元. 工程常用物质的热物理性质手册[M].北京:新时代出版社,1987.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

Comments

Recommended 0

No Suggested Reading articles found!

Calculation of Rising Time for Pressure Test of Hot Isostatic Pressure Furnace

Abstract

Cite this article

share this article

References

Related Articles 7

Metrics

Comments

Recommended 0

[1]	HAN Yan, SUN Li-chen, WANG Jing-tao, LIU Yi-huan, CHEN Wen-qing, SUI Xiao-xiang. Research of the Leak Rate Conversion for Xenon and Tracer Gas [J]. VACUUM, 2023, 60(3): 67-71.
[2]	YU Kang-yuan, HE Yu-dan, YANG Bo, LUO Jiang-shan. Effect of Sputtering Voltage on Microstructure and Properties of Cu Foils Deposited by High Power Impulse Magnetron Sputtering [J]. VACUUM, 2023, 60(3): 1-4.
[3]	SONG Yan-peng, QIANG Bo, HAN Yong-chao, TANG Rong, ZHANG Ji-feng. Detection Method for Small Leaks of Missile-Borne Klystron [J]. VACUUM, 2022, 59(4): 18-21.
[4]	ZHANG Yu-chen, ZHANG Hai-bao, CHEN Qiang. Review on Semi-Conductive ZnO Thin Film Prepared by HiPIMS [J]. VACUUM, 2021, 58(1): 72-77.
[5]	WANG Xun. Vacuum Measurement and Application for Aerospace [J]. VACUUM, 2021, 58(1): 15-18.
[6]	YANG Wei, WEI Xian-long. Review on On-Chip Electron Sources [J]. VACUUM, 2020, 57(1): 1-10.
[7]	YANG Wei, WEI Xian-long. Review on On-Chip Electron Sources [J]. VACUUM, 2019, 56(6): 16-26.