VACUUM ›› 2020, Vol. 57 ›› Issue (1): 76-82.doi: 10.13385/j.cnki.vacuum.2020.01.14
Previous Articles Next Articles
ZHAO Yu-hui1,2, YAO Chao1,2,3, WANG Zhi-guo1,2
CLC Number:
| [1] 李涤尘, 贺健康, 等. 增材制造:实现宏微结构一体化制造[J]. 机械工程学报, 2013, 49(6): 129-134. [2] 王华明. 高性能大型金属构件激光增材制造[J]. 航空学报, 2014, 35(10): 2690-2698. [3] 宋建丽, 李永堂, 邓琦林, 等. 激光熔履成形技术的研究进展[J]. 机械工程学报, 2010, 46(14): 29-39. [4] IBARRA-MEDINA J, PINKERTON A.A CFD model of the laser, coaxial powder stream and substrate interaction in laser cladding[J]. Physics Procedia, 2010, 5: 337-346. [5] TABERNERO I, LAMIKIZ A.Modelling of energy attenuation due to powder flow-laser beam interaction during laser cladding process[J]. Journal of Materials Processing Technology, 2012, 212: 516-522. [6] YASA E, DECKERS J, KRUTH J P.The investigation of the influence of laser re-melting on density, surface quality and microstructure of selective laser melting parts[J]. Rapid Prototyping Journal, 2011, 17(5): 312-327. [7] 李延民, 刘振侠, 等. 激光多层涂敷过程中的温度场测量与数值模拟[J]. 金属学报, 2003, 39(5): 521-525. [8] 栗丽, 杨洗陈, 董哲, 等. 激光熔覆中同轴粉末流温度场的CCD检测[J]. 中国激光, 2009, 36(9): 2432-2436. [9] 申卫国, 岑虎, 雷剑波, 等. 同轴送粉激光熔覆中激光透过率研究[J]. 机械工程学报, 2014, 50(8): 60-65. [10] 姚山, 曾锋, 叶昌科, 等. 新的激光快速成形方法及应用[J]. 机械工程学报, 2007, 43(5): 231-234. [11] LABUDOVIC M, HU D, KOVACEVIC R.A three dimensional model for direct laser metal powder deposition and rapid prototyping[J]. Journal of Materials Science, 2003, 38(1): 35-49. [12] TOM GRARGHS, STIJN CLIJSTERS.Determination of geometrical factors in layerwise laser melting using optical process monitoring[J]. Optics and Laser in Engineering, 2011, 49: 1440-1446. [13] BIN QIAN, LAURI TAIMISTO, ANTTI LEHTI, et al.Monitoring of temperature profiles and surface morphologies during laser sintering of alumina ceramics[J]. Journal of Asian Ceramic Societies, 2014, 64(9): 2-8. [14] 黄永俊, 曾晓雁, 等. 激光感应复合熔覆中熔覆层有效能量分析[J]. 金属热处理, 2008, 33(5): 44-47. [15] 李楠. 基于遗传算法的瞬态非线性热传导反问题研究[D]. 大连: 大连理工大学, 2014. |
| No related articles found! |
|