欢迎访问沈阳真空杂志社 Email Alert    RSS服务

VACUUM ›› 2020, Vol. 57 ›› Issue (2): 33-39.doi: 10.13385/j.cnki.vacuum.2020.02.07

• Thin Film • Previous Articles     Next Articles

Study on Wear Properties of Duplex-Treated CrVN Composite Coatings by Plasma Nitriding and Arc Ion Plating

FANG Bo1,2, ZHANG Lin2, CAI Fei2, ZHANG Shi-hong1,2   

  1. 1.School of Materials Science and Engineering, Anhui University of Technology, Ma′anshan 243002, China;
    2.Research Center of Modern Surface and Interface Engineering, Anhui University of Technology, Ma’anshan 243002, China
  • Received:2019-02-13 Online:2020-03-25 Published:2020-04-24

Abstract: Duplex-treated CrN and CrVN composite coatings were prepared on DC 53 cold work die steel substrates by plasma nitriding and arc ion plating. The microstructure, mechanical and wear properties of coatings were investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), microhardness tester and tribometer, respectively. The results showed that the as-deposited coatings were fcc structures with a (111) preferred orientation. The CrVN solid solution structure based on the fcc-CrN phase was obtained in CrVN coating. Compared to the CrN coating, the columnar grain growth was suppressed with the addition of V and the CrVN coating became denser. The microhardness and adhesive strength of V-doped CrN coating were obviously improved, while the friction coefficient and wear rate of the coating were reduced. The sticking resistance of aluminium was enhanced for CrVN coating due to the low surface roughness and the formation of self-lubricating VO2 during the wear process.

Key words: cold work mould, CrVN coatings, microstructure, tribological properties, anti-sticking

CLC Number: 

  • TG17
[1] Lagunacamacho J R, Cruzmendoza L A, Anzelmettizaragoza J C, et al.Solid particle erosion on coatings employed to protect die casting molds[J]. Progress in Organic Coatings, 2012, 74(4):750-757.
[2] 张姣姣, 王铁钢, 阎兵. 复合磁控溅射Zr-B-N涂层微结构的控制及性能研究[J]. 真空科学与技术学报, 2018,38(6):479-485.
[3] 高倩, 黄美东, 王小龙,等. 脉冲偏压占空比对复合离子镀(Cr,Al)N薄膜结构和力学性能的影响[J]. 真空, 2015,52(3):7-10.
[4] Vetter J.Vacuum arc coatings for tools: potential and application[J]. Surface & Coatings Technology, 1995, 76:719-724.
[5] Reiter A E, Derflinger V H, Hanselmann B, et al.Investigation of the properties of Al1-xCrxN coatings prepared by cathodic arc evaporation[J]. Surface & Coatings Technology, 2005, 200(7):2114-2122.
[6] Altan T, Lilly B, Yen Y C, et al.Manufacturing of dies and molds[J]. CIRP Annals - Manufacturing Technology, 2001, 50(2):404-422.
[7] 孙国威, 陈泽昊, 李云珂,等. 靶基距对杂化离子镀TiCN薄膜结构和性能的影响[J]. 真空, 2018,55(2):20-22.
[8] Li W Z, Chen Q Z, Polcar T, et al.Influence of Zr alloying on the mechanical properties, thermal stability and oxidation resistance of Cr-Al-N coatings[J]. Applied Surface Science, 2014, 317:269-277.
[9] Uchida M, Nihira N, Mitsuo A, et al.Friction and wear properties of CrAlN and CrVN films deposited by cathodic arc ion plating method[J]. Surface & Coatings Technology, 2004, 177:627-630.
[10] 贾丛丛, 李沛, 葛芳芳,等.偏压对Cr-Si-N涂层的结构与性能的影响[J]. 真空科学与技术学报, 2016, 36(4):418-424.
[11] Magnéli A.Structures of the ReO3-type with recurrent dislocations of atoms:‘homologous series’of molybdenum and tungsten oxides[J]. Acta Crystallographica, 1953, 6(6):495-500.
[12] 金浩, 李德元, 卢旭东. V含量对磁控溅射CrAlVN涂层微观结构及力学和摩擦学性能的影响[J]. 材料导报, 2016, 30(20):53-56.
[13] Bobzin K, Bagcivan N, Ewering M, et al.DC-MSIP/HPPMS (Cr,Al,V)N and (Cr,Al,W)N thin films for high-temperature friction reduction[J]. Surface & Coatings Technology, 2011, 205(8):2887-2892.
[14] Fateh N, Fontalvo G A, Gassner G, et al.Influence of high-temperature oxide formation on the tribological behaviour of TiN and VN coatings[J]. Wear, 2007, 262(9):1152-1158.
[15] 谢飞,何家文.高速钢W18Cr4V离子氮碳共渗层组织对TiN膜与基体结合强度的影响[J],金属学报,2000, 36(10): 1099-1103.
[16] Fei C, Ying G, Wei F, et al.Improved adhesion and cutting performance of AlTiSiN coatings by tuning substrate bias voltage combined with Ar ion cleaning pre-treatment[J]. Ceramics International, 2018, 44: 18894-18902.
[17] Mayrhofer P H, Mitterer C, Htman L, et al.Microstructural design of hard coatings[J]. Progress in Materials Science, 2006, 51(8):1032-1114.
[18] 喻利花, 王蕊, 许俊华. 基体负偏压对W-C-N薄膜摩擦磨损性能的影响[J]. 材料热处理学报, 2013, 34(4):166-171.
[19] Gautier C, Moussaoui H, Elstner F, et al. Comparative study of mechanical and structural properties of CrN films deposited by d.c. magnetron sputtering and vacuum arc evaporation[J]. Surface & Coatings Technology, 1996, 86-87(96):254-262.
[20] 许俊华, 曹峻, 喻利花. 磁控溅射制备TiCN复合膜的微结构与性能[J]. 中国有色金属学报, 2012,22(11):3123-3128.
[21] Allen G C, Tucker P M, Wild R K.X-ray photoelectron auger electron spectroscopic study of the initial oxidation of chromium metal[J]. Journal of Cheminform, 1978, 9(34):1126-1140.
[22] Sleigh C, Pijpers A P, Jaspers A, et al.On the determination of atomic charge via ESCA including application to organometallics[J]. Journal of Electron Spectroscopy & Related Phenomena, 1996, 77(1):41-57.
[23] Nishimura O, Yabe K, Iwaki M.X-ray photoelectron spectroscopy studies of high-dose nitrogen ion implanted-chromium: a possibility of a standard material for chemical state analysis[J]. Journal of Electron Spectroscopy & Related Phenomena, 1989, 49(3):335-342.
[24] Tougaard S.Quantitative analysis of the inelastic background in surface electron spectroscopy[J]. Surface & Interface Analysis, 1988, 11(9):453-472.
[25] Wagner C D.Sensitivity factors for XPS analysis of surface atoms[J]. Journal of Electron Spectroscopy & Related Phenomena, 1983, 32(2):99-102.
[26] NIST Standard Reference Database 20: Version 4.1[DB/OL]. (2012-9-15)[2018-1-29]. https://srdata.nist.gov/xps/.
[27] Nag N K, Massoth F E.ESCA and gravimetric reduction studies on V/Al2O3 and V/SiO2 catalysts[J]. Journal of Catalysis, 1990, 124(1):127-132.
[28] Musil J, Kunc F, Zeman H, et al.Relationships between hardness, Young's modulus and elastic recovery in hard nanocomposite coatings[J]. Surface & Coatings Technology, 2002, 154(2):304-313.
[29] 朱晓东, 米彦郁, 胡奈赛,等. 膜基结合强度评定方法的探讨―划痕法、压入法、接触疲劳法测定的比较[J]. 中国表面工程, 2002, 15(4):28-31.
[30] Wang T G, Jeong D, Kim S H, et al.Study on nanocrystalline Cr2O3 films deposited by arc ion plating: I. composition, morphology, and microstructure analysis[J]. Surface & Coatings Technology, 2012, 206(10):2629-2637.
[31] 周军, 樊湘芳, 李涛,等. 弧电流对多弧离子镀TiAlN涂层表面形貌和性能的影响[J]. 材料保护, 2018,51(6):74-78.
[32] 董标, 毛陶杰, 陈汪林,等. Al/Cr原子比对AlCrTiSiN多元复合刀具涂层微观结构及切削性能的影响[J]. 中国表面工程, 2016, 29(5):49-55.
[33] Mouni R, Sourav G, Milan K N, Solvothermal synthesis of Cr2O3 nanocubes via template-free route[J]. Materials Chemistry and Physics, 2015,159:101-106.
[34] Singh J, Verma V, Kumar R.Preparation and structural, optical studies of Al substituted chromium oxide (Cr2O3) nanoparticles[J]. Vacuum, 2019,159: 282-286.
[35] Pan M, Liu J, Zhong H, et al.Raman study of the phase transition in VO2 thin films[J]. Journal of Crystal Growth, 2004, 268(1):178-183.
[36] Ovcharenko A, Halperin G, Etsion I.In situ and real-time optical investigation of junction growth in spherical elastic-plastic contact[J]. Wear, 2008, 264(11):1043-1050.
[1] ZHONG Li, SHEN Li-ru, CHEN Mei-yan, LIU Tong, DAN Min, JIN Fan-ya. Study on Tribological Properties of (Ti, Cr) N Films [J]. VACUUM, 2020, 57(2): 27-32.
[2] LIU Ling-yun, LIN Song-sheng, WANG Di, LI Feng, DAI Ming-jiang, SHI Qian, WEI Chun-bei. Study on Preparation and Properties of CrAlN Anti-erosion Coating [J]. VACUUM, 2020, 57(2): 40-46.
[3] ZHANG Ying-wei, LI Xiao-dan, GAO Zheng-yu, NI Jia-qiang, LIU Yan-mei, LI Jian-zhong. Research of Electrolytic Polishing on Selective Laser Melting TC4 Alloy in Perchloric Acid Media [J]. VACUUM, 2020, 57(2): 78-82.
[4] LI Xiang, LAI You-bin, YANG Bo, WANG Dong-yang, SUN Ming-han, WU Hai-long,YUAN Ren-yue, SUN Shi-jie. Application Status and Prospect of Cladding Technology on Soil-engaging Components of Agricultural Machinery [J]. VACUUM, 2020, 57(1): 83-87.
[5] WU Zhong-can, LIU Liang-liang, TANG Wei; YANG Chao, MA Zheng-yong. Fabrication and Properties of Robust Superhydrophobic F-DLC Coatings [J]. VACUUM, 2019, 56(6): 30-35.
[6] WANG Di, LIN Song-sheng, LIU Ling-yun, YANG Hong-zhi, JIANG Bai-ling, XUE Yu-na, ZHOU Ke-song. Research Progress of Surface Treatment Technology on Fatigue Properties of Titanium Alloy [J]. VACUUM, 2019, 56(6): 36-42.
[7] WANG Dong-yang, LAI You-bin, YANG Bo, LI Xiang, WU Hai-long, SUN Ming-han, YUAN Ren-yue, SUN Shi-jie. Influence of Process Parameter on the Residual Stress of Multi-Track Overlapping Plasma Cladding [J]. VACUUM, 2019, 56(6): 80-84.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] LI De-tian, CHENG Yong-jun, ZHANG Hu-zhong, SUN Wen-jun, WANG Yong-jun, SUN Jian, LI Gang, . Preparations and applications of carbon nanotube field emitters[J]. VACUUM, 2018, 55(5): 1 -9 .
[2] ZHOU Bin-bin, ZHANG jian, HE Jian-feng, DONG Chang-kun. Carbon nanotube field emission cathode based on direct growth technique[J]. VACUUM, 2018, 55(5): 10 -14 .
[3] LI Zhi-sheng. Development of ultra large shielded door for infrared calibration in simulated space environment[J]. VACUUM, 2018, 55(5): 66 -70 .
[4] ZHENG Lie, LI Hong. Design of 200kV/2mA continuous adjustable DC high voltage generator[J]. VACUUM, 2018, 55(6): 10 -13 .
[5] CHAI Xiao-tong, WANG Liang, WANG Yong-qing, LIU Ming-kun, LIU Xing-zhou, GAN Shu-yi. Operating parameter data acquisition system for single vacuum pump based on STM32F103 microcomputer[J]. VACUUM, 2018, 55(5): 15 -18 .
[6] SUN Li-zhi, YAN Rong-xin, LI Tian-ye, JIA Rui-jin, LI Zheng, SUN Li-chen, WANG Yong, WANG Jian, . Research on distributing law of Xenon in big accumulation chamber[J]. VACUUM, 2018, 55(5): 38 -41 .
[7] HUANG Si, WANG Xue-qian, MO Yu-shi, ZHANG Zhan-fa, YING Bing. Experimental study on similarity law of liquid ring compressor performances[J]. VACUUM, 2018, 55(5): 42 -45 .
[8] JI Ming, SUN Liang, YANG Min-bo. Design of automatic sealing and locking scheme for lunar sample[J]. VACUUM, 2018, 55(6): 24 -27 .
[9] LI Min-jiu, XIONG Tao, JIANG Ya-lan, HE Yan-bin, CHEN Qing-chuan. 20kV high voltage based on double transistor forward converter pulse power supply for metal deburring[J]. VACUUM, 2018, 55(5): 19 -24 .
[10] LIU Yan-wen, MENG Xian-zhan, TIAN Hong, LI Fen, SHI Wen-qi, ZHU Hong, GU Bing. Test of ultra high vacuum in space traveling-wave tube[J]. VACUUM, 2018, 55(5): 25 -28 .
辽ICP备06004570号-4
Copyright © VACUUM, All Rights Reserved.
Tel: （024）24134406 24110136 24121929　Fax: （024） 24121929　E-mail: zkzk1964@126.com
Powered by Beijing Magtech Co. Ltd