VACUUM ›› 2022, Vol. 59 ›› Issue (5): 86-90.doi: 10.13385/j.cnki.vacuum.2022.05.15
• Vacuum Technology Application • Previous Articles Next Articles
ZHANG Hao, ZHANG He-jin, ZHAI Yue, WANG Jie
CLC Number:
| [1] 鄂东梅. 真空技术在航空航天中的应用[J]. 真空, 2021, 58(3): 77-81. [2] DOTY J, YERKES K, BYRD L, et al.Dynamic thermal management for aerospace technology: review and outlook[J]. Journal of Thermophysicsand Heat Transfer, 2015, 31(1): 86-98. [3] 王东升, 李翀, 李健, 等. 基于数据匹配的机载外挂装备部件振动试验优化设计方案[J]. 航天器环境工程, 2020, 37(2): 191-196. [4] 朱广荣, 施荣明, 杨松, 等. 军用装备实验室环境试验方法第15部分:加速度试验: GJB 150.15A-2009[S]. 2009: 1-9. [5] 王东升, 钟继根, 周桐. 某结构在振动-加速度复合环境下的响应优化[J]. 航天器环境工程, 2012, 29(2): 139-143. [6] LIN K, CHEN Y, XU D.Reliability assessment model considering heterogeneous population in a multiple stresses accelerated test[J]. Reliability Engineering & System Safety, 2017, 165(9): 134-143. [7] 申付波, 王杰, 翟悦, 等. 轻型低温吸附床壳体的研究与优化设计[J]. 真空, 2018, 55(6): 42-44. [8] ZHANG Y, LI F, JIA D.Lightweight design and static analysis of lattice compressor impeller[J]. Scientific Reports, 2020, 10(1): 18394. [9] 苗玲. 机载无源相控阵天线结构轻量化设计[J]. 电子机械工程, 2019, 35(4): 7-11. [10] 高云凯, 申振宇, 冯兆玄, 等. 多目标优化在车门轻量化设计中的应用[J]. 同济大学学报, 2017, 45(2): 275-281. [11] KRISHNAMURTHY V, HANDOJO V.Structural design static analysis process and subsequent flight mechanical evaluation in preliminary aircraft design: demonstrated on passenger ride comfort assessment[J]. CEAS Aeronautical Journal, 2021, 12(2): 457-469. [12] XIAO Z, QIAN W, ZHOU L.Aeroelastic optimization design of composite wing for large aircraft with panel stiffness matching[J]. Journal of Beijing University of Aeronautics and Astronautics, 2018, 44(8): 1629-1635. [13] 严宏. 基于拓扑优化的某机载显控台轻量化设计[J]. 机械与电子, 2016, 34(11): 22-25. [14] 申付波, 翟悦, 张剑刚, 等. 基于ANSYS Workbench的吸附床壳体仿真及优化设计[J]. 真空, 2017, 54(5): 68-70. [15] 黄舟, 黄海. 六自由度振动台台体结构优化设计研究[J]. 航天器环境工程, 2016, 32(5): 560-565. [16] 陈磊, 洪建忠, 杨永生, 等. 相对变形约束下某离心机吊篮拓扑优化设计[J]. 航天器环境工程, 2012, 29(1): 100-103. [17] 陶腊宝, 杨庆喜, 徐皓, 等. CFETR VVPSS中爆破片优化设计与疲劳分析[J]. 真空科学与技术学报, 2020, 40(1): 79-83. [18] 蔺晓建, 蒙峻, 杨伟顺, 等. 基于ANSYS Workbench的薄壁二极铁真空室优化设计[J]. 真空科学与技术学报, 2018, 38(4): 296-301. [19] 李奇志, 陈国平, 陈文华, 等. 最小响应偏离度的振动夹具优化设计[J]. 振动工程学报, 2014, 27(4): 473-480. [20] JIE G, HAO L, LIANG G, et al.Topological shape optimization of 3D micro-structured materials using energy-based homogenization method[J]. Advances in Engineering Software, 2018, 116(9): 89-102. [21] 杨建国, 吕志军. 基于ANSYS Workbench的货架立柱截面优化设计[J]. 东华大学学报, 2011, 34(7): 438-441. |
| [1] | ZHOU Yuan, RAN Ao, WU Yi-heng, XIE Yuan-hua, LIU Kun. Design and Analysis of High Vacuum Chamber for MEMS Ion Source Testing Based on ANSYS [J]. VACUUM, 2022, 59(3): 16-19. |
| [2] | TAN Biao, HUANG Tao, WANG Peng-cheng, LIU Jia-ming, GUAN Yu-hui, LIU Shun-ming, SUN Xiao-yang, DONG Hai-yi. The Vacuum System of RCS at CSNS [J]. VACUUM, 2021, 58(3): 1-6. |
| [3] | WANG Zhi-rong, MA Qiang, LONG Guo-liang, LI Xue-feng, LIU Cheng. Development and Application of Multi-Chamber Tunnel Continuous Vacuum Sintering Furnace and Heat Treatment Furnace [J]. VACUUM, 2019, 56(5): 6-11. |
| [4] | CHEN Hai-feng, LIN Le-zhong. Design of Chamber C1 for Low-E Glass Coating Line [J]. VACUUM, 2019, 56(5): 47-51. |
| [5] | HUANG HUA-yan, LIU Fang. Study of the electron-stimulated desorption equipment [J]. VACUUM, 2019, 56(2): 31-36. |
|