欢迎访问沈阳真空杂志社 Email Alert    RSS服务

真空 ›› 2021, Vol. 58 ›› Issue (2): 42-47.doi: 10.13385/j.cnki.vacuum.2021.02.09

• 真空冶金与热工 • 上一篇    下一篇

真空钎焊系统内材料出气对压升率的影响研究

石扬, 解永强, 武春晖, 暴翔, 王成君, 王永卿, 赵兴亮   

  1. 中国电子科技集团公司第二研究所,山西 太原 030024
  • 收稿日期:2020-05-26 出版日期:2021-03-25 发布日期:2021-04-09
  • 作者简介:石扬(1983-),男,山西省太原市人,本科,工程师。

Study on Effect of Material Outgassing on the Pressure Rise Rate in Vacuum Brazing System

SHI Yang, XIE Yong-qiang, WU Chun-hui, BAO Xiang, WANG Cheng-jun, WANG Yong-qing, ZHAO Xing-liang   

  1. The Second Research Institute of China Electronics Technology Group Corporation, Taiyuan 030024,China
  • Received:2020-05-26 Online:2021-03-25 Published:2021-04-09

摘要: 随着微电子封装向小型化、高密度化、高可靠性的方向发展,各行业对钎焊技术提出了高钎透率、高钎焊接头质量、材料具备高净化度等需求。高真空钎焊技术也随之日益普及、加速发展。该技术通过保障真空室的洁净度及焊接真空度,进而保障元器件的焊接质量及寿命。高真空钎焊技术要求真空钎焊炉具备高真空度、低压升率。高温下材料出气是高真空状态下炉体内的主要气源,直接影响着保真空时间。针对已组装完成的真空钎焊炉,本文进行了炉体材料表面放气、炉体压升率的理论研究计算;实际测试了真空钎焊炉所能达到的真空度及压升率;详细分析了高温下炉体材料表面出气特性;分析了不同温度对材料放气的影响;建立了一种材料放气-压升率模型,以期更好地指导真空钎焊炉设计。

关键词: 高真空, 压升率, 烘烤, 材料放气, 真空钎焊

Abstract: With the development of miniaturization,high density and high reliability of microelectronic packaging, various industries have put forward the requirements of high penetration rate,high quality of brazed joints and high cleanliness of materials for brazing technology. High vacuum brazing technology is becoming more and more popular with accelerating development. Such technology ensures the cleanness of vacuum chamber and welding vacuum degree, and then guarantees the welding quality and service life of components. High vacuum brazing technology requires high vacuum and low pressure rise rate. The outgassing of materials at high temperature is the main gas source in the furnace under high vacuum condition, which directly affects the vacuum holding time. In view of the assembled vacuum brazing furnace, the theoretical research and calculation of the outgassing of the furnace material surface and the pressure rise rate of the furnace body are carried out. The vacuum degree and pressure rise rate that vacuum brazing furnace can achieve are tested. The outgassing characteristics of material surface at high temperature are analyzed in detail. The influence of different temperature on the outgassing of materials is analyzed. A model of out gassing pressure rise rate of materials is established, in order to better guide the design of vacuum brazing furnace.

Key words: high vacuum, pressure rise rate, bake, material bleeding, vacuum brazing

中图分类号: 

  • TB751
[1] 孙柏洲, 张淮. 小议真空钎焊技术的应用[J]. 今日科苑, 2007(22): 71.
[2] 徐成海. 真空工程技术[M]. 北京: 化工工业出版社, 2006: 523.
[3] 王东生, 杜伟明, 邓斌. 浅论现代先进焊接技术[J]. 电子工业专用设备, 2018, 8(271): 49-51.
[4] 王禾, 潘旷, 杨程,等. 排锡槽工艺对电子产品真空钎焊钎透率的影响[J]. 电子工艺技术, 2019, 40(6): 332, 335, 340.
[5] 林茂广. 奥氏体不锈钢与纯铜的真空钎焊工艺研究[D]. 镇江: 江苏科技大学, 2013.
[6] 高磊. 真空钎焊工艺与应用[J]. 科技创新导报, 2008(27): 72.
[7] 程建平, 张红梅. 高温真空钎焊设备的研制[J]. 电子工艺技术, 2010, 31(1): 48-50.
[8] 李文刚. 铝合金真空钎焊技术及发展趋向分析[J]. 科学技术创新, 2018(2): 195-196.
[9] 凌桂龙, 蔡国飙, 张建华. 基于真空羽流试验的洁净真空系统设计[J]. 航空动力学报, 2013, 28(5): 1173-1179.
[10] 田玉林, 黄文学, 王玥,等. RFQ1L系统压升率的理论与实验研究[J]. 原子核物理评论, 2008, 25(1): 44-47.
[11] 达道安. 真空设计手册[M]. 北京: 国防工业出版社, 1991: 1025-1083.
[12] 郭等柱, 王福云, 白芝芳. 钛泵—不锈钢超高真空系统静态升压特性研究[J]. 真空与低温, 1999, 5(4): 238-241.
[13] 曲锋, 刘英超. 静态升压法在真空粉末绝热低温液体贮槽检漏中的应用分析[J]. 机械工程师, 1992(5): 38-39.
[14] 张莉, 苏颜丽, 宋学全. 真空设备应用于真空系统漏气综述[J]. 应用能源技术, 2000(4): 16-17.
[15] 李朝明, 杨小元. 金属材料高温出气性能的研究[J]. 真空科学与技术, 1989, 9(4): 211-217.
[1] 蔡潇, 曹曾, 张炜, 李瑞鋆, 黄勇. HL-2M装置真空室预抽气系统的研制*[J]. 真空, 2021, 58(1): 33-37.
[2] 邢银龙, 吴杰峰, 刘志宏, 李波, 周能涛. 316LN异型真空盒超高真空表面处理工艺的研究*[J]. 真空, 2019, 56(6): 27-29.
[3] 王博锋 , 胡旭华 , 周冠丽 , 李宏宇 , 周健勇 , 王小霞 , 张兆传 . 微波管电子枪真空除气系统设计[J]. 真空, 2019, 56(1): 6-10.
[4] 李得天, 成永军, 张虎忠, 孙雯君, 王永军, 孙 健, 李 刚, 裴晓强. 碳纳米管场发射阴极制备及其应用研究[J]. 真空, 2018, 55(5): 1-9.
[5] 刘燕文, 孟宪展, 田 宏, 李 芬, 石文奇, 朱 虹, 谷 兵, 王小霞 . 空间行波管极高真空的获得与测量[J]. 真空, 2018, 55(5): 25-28.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!