欢迎访问沈阳真空杂志社 Email Alert    RSS服务

真空 ›› 2018, Vol. 55 ›› Issue (6): 1-4.doi: 10.13385/j.cnki.vacuum.2018.06.01

• •    下一篇

航天器密封舱连接处漏率检测方法

武 越 1,鄂东梅 2,杜 鹏 1,郭子寅 1,陈时雨 1,王 晶 1   

  1. 1.北京卫星环境工程研究所,北京 100094;2.沈阳真空技术研究所有限公司,辽宁 沈阳 110042
  • 收稿日期:2018-09-20 出版日期:2018-11-25 发布日期:2018-12-09
  • 通讯作者: 王晶,研究员
  • 作者简介:武越(1983~),男,辽宁省沈阳市人,硕士,高级工程师。

The leak detection method of the joint of spacecraft capsule

Wu Yue1, E Dong-mei2, Du Peng1, Guo Zi-yin1, Chen Shi-yu1, Wang Jing1   

  1. 1. Beijing Institute of Spacecraft Environment Engineering, Beijing 100094, China; 2. Shenyang Vacuum Technology Institute Co.,Ltd., Shenyang 110042, China
  • Received:2018-09-20 Online:2018-11-25 Published:2018-12-09

摘要: 带有密封舱段的航天器进行真空热试验时,需要通过容器外的压控系统对密封舱内的压力进 行调节与控制。一般通过压控管道(金属波纹管)将密封舱与压控系统相连,一旦压控管道与密封舱连接 处出现泄漏,航天器真空热试验将无法进行,因此,保证连接处漏率满足试验要求十分重要。本文对连接 处的具体结构进行研究,得出了连接处的漏率检测方法,并进行了试验验证,取得了良好的效果。

关键词: 真空热试验, 密封舱, 连接处, 漏率检测

Abstract: The pressure within capsule need to be regulated and controlled by the pressure control system outside the vessel in the process of thermal vacuum test for spacecraft with capsule. Generally, the capsule is connected with the pressure control system via pressure -controlled pipeline (metal bellows). Any leak in the joint of the pressure -controlled pipeline and capsule would make the thermal vacuum test for spacecraft impossible, hence it is of great importance to ensure that the leak rate of joint meet the test requirements. This thesis, studying the specific structure of joint, achieves the leak detection method of the joint, which is verified by test and acquires good effect.

Key words: thermal vacuum test, capsule, joint, leak detection

中图分类号: 

  • N34
No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 李得天, 成永军, 张虎忠, 孙雯君, 王永军, 孙 健, 李 刚, 裴晓强. 碳纳米管场发射阴极制备及其应用研究[J]. 真空, 2018, 55(5): 1 -9 .
[2] 周彬彬, 张 建, 何剑锋, 董长昆. 基于 CVD 直接生长法的碳纳米管场发射阴极[J]. 真空, 2018, 55(5): 10 -14 .
[3] 李志胜. 空间环境下超大型红外定标用辐射屏蔽门的研制[J]. 真空, 2018, 55(5): 66 -70 .
[4] 郑 列, 李 宏. 200kV/2mA 连续可调直流高压发生器的设计[J]. 真空, 2018, 55(6): 10 -13 .
[5] 柴晓彤, 汪 亮, 王永庆, 刘明昆, 刘星洲, 干蜀毅. 基于 STM32F103 单片机的单泵运行参数数据采集系统[J]. 真空, 2018, 55(5): 15 -18 .
[6] 黄 思 , 王学谦 , 莫宇石 , 张展发 , 应 冰 . 液环压缩机性能相似定律的实验研究[J]. 真空, 2018, 55(5): 42 -45 .
[7] 纪 明, 孙 亮, 杨敏勃. 一种用于对月球样品自动密封锁紧的设计[J]. 真空, 2018, 55(6): 24 -27 .
[8] 刘燕文, 孟宪展, 田 宏, 李 芬, 石文奇, 朱 虹, 谷 兵, 王小霞 . 空间行波管极高真空的获得与测量[J]. 真空, 2018, 55(5): 25 -28 .
[9] 徐法俭, 王海雷, 赵彩霞, 黄志婷. 化学气体真空 - 压缩回收系统在环境工程中应用研究[J]. 真空, 2018, 55(5): 29 -33 .
[10] 谢元华, 韩 进, 张志军, 徐成海. 真空输送的现状与发展趋势探讨(五)[J]. 真空, 2018, 55(5): 34 -37 .