欢迎访问沈阳真空杂志社 Email Alert    RSS服务

VACUUM ›› 2020, Vol. 57 ›› Issue (5): 28-31.doi: 10.13385/j.cnki.vacuum.2020.05.07

• Thin Film • Previous Articles     Next Articles

Study on Friction and Wear Properties of CrAlNx Coating on Roller Surface

HAO Wei-jin, CHEN Rong-fa, CAO Pei, GONG Zi-yu, LI Jing, GENG Hao-ran, WANG Zi-li   

  1. Department of Mechanical Engineering, Yangzhou University, Yang Zhou 225001, China
  • Received:2020-11-21 Published:2020-11-06

Abstract: CrAlNx coating was deposited onto roll surface of 45 steel by vacuum ion plating, and the production technology of CrAlNx coating was optimized. The friction performance of CrAlNx coating was studied. The results show that the friction coefficient of CrAlNx coating decreases with the increase of speed and load under the condition of GCr15. With the increase of the loading and sliding speed, the wear rate under the condition of the GCr15 accessory is increased, and the wear mode of the GCr15 is mainly shown as the mixed form of adhesive wear and abrasive wear.

Key words: CrAlNx coating, coating thickness, coefficient of friction, adhesion wear

CLC Number: 

  • TB43
[1] 冯军, 金凡亚, 童洪辉, 等. 离子渗氮对 Ti N 涂层组织与性能的影响[J]. 金属热处理, 2015, 40(2): 140-143.
[2] Niyomsoan S, Grant W, Olson D L, et al.Variation of color in titanium and zirconium nitride decorative thin films[J]. Thin Solid Films, 2002, 415: 187-194.
[3] Kim T S, Park S S, Lee B T.Characterization of nano-structured Ti N thin films prepared by R. F. magnetron sputtering[J]. Materials Letters, 2005, 59: 3929-3932.
[4] 杨凯. 反应磁控溅射法制备 Ti N 涂层的研究[D]. 南京: 东南大学, 2006.
[5] 冯文然, 阎殿然, 何继宁, 等. 反应等离子喷涂纳米TiN涂层的显微硬度及微观结构研究[J]. 物理学报, 2005, 54(5): 2399.
[6] 韩修训, 阎鹏勋, 阎逢元, 等. 两种物理气相沉积氮化钛涂层的结构及摩擦性能研究[J]. 摩擦学学报, 2002, 22(3): 175-179.
[7] 史新伟, 刘正义, 邱万起, 等. 电弧离子镀TiN膜中的缺陷及其形成原因[J]. 中国表面工程, 2006, 19(1): 43-46.
[8] 钟彬, 苟伟, 李国卿, 等. 氮气含量对CrN涂层相结构及摩擦磨损性能的影响[J]. 材料热处理学报. 2007(28): 134-138.
[9] 杜军, 田林海. IBAD制备非晶碳膜与CrN镀层的耐磨性能比较及机理分析[J]. 真空科学与技术学报. 2006(26): 255-258.
[10] Zhou F, Chen K M, Wang M L, et a1. Friction and wear properties of CrN coating sliding against Si3N4 balls in water and air[J]. Wear. 2008(265): 1029-1037.
[11] Xu J, Kato K.Formation of tribochemical layer of ceramics sliding in water and its role for low friction[J]. Wear, 2000(245): 61-75.
[1] . [J]. VACUUM, 2020, 57(4): 95-96.
[2] ZHANG Shuang, DONG Chuang, MA Yan-ping, DING Wan-yu. Material Characteristics of Thin Films [J]. VACUUM, 2020, 57(4): 11-18.
[3] GAO Peng, JIN Xiu, REN Shao-peng, WANG Zhong-lian, ZHAO Shuai-feng, YIN Xiao-jun. Discussion on Optical Coating Standards at Home and Abroad [J]. VACUUM, 2020, 57(4): 19-23.
[4] . [J]. VACUUM, 0, (): 94-96.
[5] FANG Bo, ZHANG Lin, CAI Fei, ZHANG Shi-hong. Study on Wear Properties of Duplex-Treated CrVN Composite Coatings by Plasma Nitriding and Arc Ion Plating [J]. VACUUM, 2020, 57(2): 33-39.
[6] LIU Ling-yun, LIN Song-sheng, WANG Di, LI Feng, DAI Ming-jiang, SHI Qian, WEI Chun-bei. Study on Preparation and Properties of CrAlN Anti-erosion Coating [J]. VACUUM, 2020, 57(2): 40-46.
[7] XIA Zhu-jie, ZHANG Zhi-guo, WANG Hong-li, SU Yi-fan, TANG Peng, LIN Song-sheng, DAI Jiang-ming, SHI Qianb. Preparation and Electrochromic Properties of WO3 Thin Films [J]. VACUUM, 2020, 57(2): 47-52.
[8] YUE Ling, SHI Yue-juan, MA Yu-shan, LIU Hai-bo, ZHOU Yong-xing, ZHANG Ming-ming, GONG Chun-zhi, TIAN Xiu-bo. Treatment of Inner Surface of Guide Sleeve with Inner Diameter of 20mm(1): Characteristics of Argon Hollow Cathode Discharge [J]. VACUUM, 2020, 57(2): 53-57.
[9] . [J]. VACUUM, 2020, 57(2): 94-96.
[10] CHEN Zhi-tao. Development of All-glass Vacuum Heat Collector Coating Equipment [J]. VACUUM, 2020, 57(1): 35-39.
[11] . [J]. VACUUM, 2020, 57(1): 94-96.
[12] WANG Zhong-lian, REN Shao-peng, YIN Xiao-jun, WANG Rui-sheng, GAO Peng, BAN Chao, HU Wen-wen. Study of Design and Measurement for Variable Filter [J]. VACUUM, 2020, 57(1): 21-25.
[13] WU Hou-pu, TIAN Qin-wen, TIAN Xiu-bo, GONG Chun-zhi. Development and Discharge Behavior of Novel Double Bipolar Pulse High Power Impulse Magnetron Sputtering System [J]. VACUUM, 2019, 56(6): 1-6.
[14] . [J]. VACUUM, 2019, 56(6): 85-86.
[15] LI Hao, WANG Dong-wei, ZHANG Chuan, LIU Chan, HUANG Mei-dong. Study on corrosion-resistance of Cr/CrN multilayers by arc ion plating [J]. VACUUM, 2019, 56(3): 21-26.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] LI De-tian, CHENG Yong-jun, ZHANG Hu-zhong, SUN Wen-jun, WANG Yong-jun, SUN Jian, LI Gang, . Preparations and applications of carbon nanotube field emitters[J]. VACUUM, 2018, 55(5): 1 -9 .
[2] ZHOU Bin-bin, ZHANG jian, HE Jian-feng, DONG Chang-kun. Carbon nanotube field emission cathode based on direct growth technique[J]. VACUUM, 2018, 55(5): 10 -14 .
[3] LI Zhi-sheng. Development of ultra large shielded door for infrared calibration in simulated space environment[J]. VACUUM, 2018, 55(5): 66 -70 .
[4] ZHENG Lie, LI Hong. Design of 200kV/2mA continuous adjustable DC high voltage generator[J]. VACUUM, 2018, 55(6): 10 -13 .
[5] CHAI Xiao-tong, WANG Liang, WANG Yong-qing, LIU Ming-kun, LIU Xing-zhou, GAN Shu-yi. Operating parameter data acquisition system for single vacuum pump based on STM32F103 microcomputer[J]. VACUUM, 2018, 55(5): 15 -18 .
[6] SUN Li-zhi, YAN Rong-xin, LI Tian-ye, JIA Rui-jin, LI Zheng, SUN Li-chen, WANG Yong, WANG Jian, . Research on distributing law of Xenon in big accumulation chamber[J]. VACUUM, 2018, 55(5): 38 -41 .
[7] HUANG Si, WANG Xue-qian, MO Yu-shi, ZHANG Zhan-fa, YING Bing. Experimental study on similarity law of liquid ring compressor performances[J]. VACUUM, 2018, 55(5): 42 -45 .
[8] JI Ming, SUN Liang, YANG Min-bo. Design of automatic sealing and locking scheme for lunar sample[J]. VACUUM, 2018, 55(6): 24 -27 .
[9] LI Min-jiu, XIONG Tao, JIANG Ya-lan, HE Yan-bin, CHEN Qing-chuan. 20kV high voltage based on double transistor forward converter pulse power supply for metal deburring[J]. VACUUM, 2018, 55(5): 19 -24 .
[10] LIU Yan-wen, MENG Xian-zhan, TIAN Hong, LI Fen, SHI Wen-qi, ZHU Hong, GU Bing. Test of ultra high vacuum in space traveling-wave tube[J]. VACUUM, 2018, 55(5): 25 -28 .