欢迎访问沈阳真空杂志社 Email Alert    RSS服务

VACUUM ›› 2024, Vol. 61 ›› Issue (3): 79-83.doi: 10.13385/j.cnki.vacuum.2024.03.14

• Vacuum Metallurgy and Thermal Engineering • Previous Articles     Next Articles

Design Analysis of External Mechanized Chamber Heat Treatment Furnace

WANG Bao-lai, SU Ning, CHEN Ding, CHE En-lin, LIU Jun, WANG Zhen   

  1. Shenyang Vacuum Technology Institute Co., Ltd., Shenyang 110042, China
  • Received:2023-07-25 Published:2024-06-04

Abstract: The external mechanized chamber heat treatment furnace is an important equipment for heat treatment of steel pipes and bars. The scientific and rational design is conducive to improving the operating efficiency of the external mechanized chamber heat treatment furnace and the steel pipe quality. This article analyzes the overall equipment design requirements of the external mechanized chamber heat treatment furnace from the perspective of process and structure design. Taking the design of a certain treatment furnace as an example, combined with its process requirements, installation process, safety and quality inspection requirements, the difficulties in heat treatment furnace design were explored from different aspects, in order to provide a reference for relevant personnel.

Key words: mechanization, chamber type heat treatment furnace, design

CLC Number:  TB756

[1] 桂愉平, 王彦杰, 李少军, 等. 真空热处理炉绝缘陶瓷对钽粉杂质的影响[J]. 热处理技术与装备, 2023, 44(2): 64-67.
[2] 赵振兴. 关于热处理炉应用与有效加热区检测的探讨[J]. 冶金与材料, 2023, 43(1): 29-31.
[3] 马容忠. 承压设备焊后热处理工艺实施的控制[J]. 化工装备技术, 2023, 44(1): 65-68.
[4] 张荣明. 单张极薄钢板连续热处理炉炉辊间距的计算[J]. 工业炉, 2023, 45(1): 46-49.
[5] ALLEY K D.Microbial machines: experiments with decentralized wastewater treatment and reuse in India[M]. California: University of California Press, 2023.
[6] ESQUINAS M A.Ventilator induced lung injury in non-invasive ventilatory support: pathophysiology, treatment and prevention[M]. New York:Nova Science Publishers, Inc., 2023.
[7] DUNCANSON G R.Veterinary treatment of llamas and alpacas[M].London:CABI,2023.
[8] HARVEY J P, SINGH S, OISHI K, et al.Quantification of the chemical reactivity of molten nitrate salts with heat treatable aluminum alloys[J]. Materials & Design, 2021, 198: 109293.
[9] 王猛, 卢宪强, 温亮. 钢厂热处理炉保安电源可靠性分析与改造[J]. 冶金动力, 2022(4): 27-31.
[10] 刘越. 高精度热处理炉系统精度影响因素分析[J].工业加热, 2022, 51(7): 53-55.
[11] 吴家雷, 姜贤文, 王乃军, 等. 变容式台车热处理电阻炉的选型设计[J]. 现代制造技术与装备, 2022, 58(4): 90-97.
[12] 周杰, 史和生, 史航, 等. 一种智能化电热处理炉用温湿度传感器的变送器: CN215450012U[P].2022-01-07.
[13] 李春泉. 台车式热处理炉加热过程模拟与分析[J].油气田地面工程, 2022, 41(4): 17-22.
[14] 杨超. 辊底式热处理炉炉底辊损坏形式及对策分析[J]. 冶金与材料, 2021, 41(4): 27-28.
[15] 杨小兵, 江华. 高速烟气环流技术在辊底式热处理炉上的应用[J]. 工业加热, 2021, 50(1): 24-26.
[16] 杨东峰, 李倩倩. 浅析降低无氧化辊底式热处理炉天然气消耗的途径[J].中国金属通报, 2020(12): 189-190.
[17] 李家栋, 刘宇佳, 王孝敏, 等. 厚板辊底式热处理炉过程控制系统研发及应用[J]. 冶金自动化, 2020, 44(5): 61-67.
[18] 赵振永, 汪有源, 刘东国, 等. 炉底烧嘴在步进梁式热处理炉上的应用[J]. 工业炉, 2020, 42(1): 27-29.
[19] 于吉生, 徐颖, 张盛开. 脉冲式热处理炉炉温自适应设计[J]. 冶金自动化, 2018, 42(6): 37-40.
[20] 王俊. 辊底式热处理炉过程控制系统及应用[J]. 冶金与材料, 2018, 38(5): 78.
[1] YAN Chao, ZHANG Tao, JIA Zi-zhao, CHENG Cheng, ZHAO Guo-hua. Development of Water-cooled Copper Crucible for Electron Beam Melting [J]. VACUUM, 2024, 61(2): 78-85.
[2] WANG Jin-wei, LI Jin-ming, LIU Jun-nan, CHEN Ming. Design of Automatic Pumping System for Liquid Nitrogen Cooling Monochromators of SSRF [J]. VACUUM, 2023, 60(5): 66-70.
[3] SUN Zhen-hua, ZHAO Zhe, WANG Ding, ZHANG Fan. Design of Vacuum Evaporation Coating Equipment for Continuous Strip Steel [J]. VACUUM, 2023, 60(5): 42-46.
[4] QI Song-song, NI Jun, LI Zhuo-hui, SHI Cheng-tian, FENG Lei, CHEN Hong-bin, LI Can-lun. Research on Gate Design and Optimization of Super Large Vacuum Vessel [J]. VACUUM, 2023, 60(5): 81-85.
[5] GAO Xin-xing, LIU Xin, ZHANG Rui-yu, LIU Shi-bing, LI Xin-ke. Vibration Reduction Design Method of Vacuum Arc Skull Furnace Based on Mode Shape Optimization [J]. VACUUM, 2023, 60(3): 76-79.
[6] REN Chang-qing, XU Fa-jian, HUANG Zhi-ting, YUAN Zheng, ZHANG Ze-sheng. Research on Screw Dry Vacuum-Compression System with Scene as Design Input [J]. VACUUM, 2023, 60(3): 46-50.
[7] LI Xiao-gang, HU Yong, GAO Feng, HU Xiang-e, GAN Zhi-hua. Design of Gas Adsorption Performance Measurements at Low Temperature and Low Pressure [J]. VACUUM, 2023, 60(1): 42-45.
[8] SONG Guang-hui, LI Wen-long, WANG Yin-he, HU Wen-wen, YAO Chun-long, LIU Hai-tao. Optimization Design and Preparation of Wide Angle Incidence Near UV Reflector [J]. VACUUM, 2021, 58(6): 38-42.
[9] LI Xin, LONG Xin-ping, CHENG Huai-yu, LIU Qi. Theoretical Calculation of Ejectors and the Development of Software [J]. VACUUM, 2021, 58(3): 65-70.
[10] GAO Peng, BAN Chao, REN Shao-peng, JIN Xiu, WANG Zhong-lian, YANG Wen-hua. An Optimization for Optical Coating Design Based on Genetic Algorithm [J]. VACUUM, 2021, 58(2): 27-30.
[11] ZHANG Shi-wei, SUN Kun, HAN Feng. Discussion on Several Common Problems in Screw Vacuum Pump Design [J]. VACUUM, 2021, 58(1): 23-28.
[12] GUO Zhi-shuai, FEI Shu-guo, YIN Xiao-jun, GAO Peng, ZHAO Shuai-feng, WANG Yin-he, SONG Guang-hui. Design and Coating Technology of Optical Filter for Infrared Thermometry Imaging [J]. VACUUM, 2020, 57(6): 18-22.
[13] REN Shao-peng, GAO Peng, ZHAO Shuai-feng, WANG Rui-sheng, WANG Zhong-lian, BAN Chao. Design of Coating System for Multi-pass Filter in Fluorescence Application [J]. VACUUM, 2020, 57(5): 14-18.
[14] ZHANG Shuang, DONG Chuang, MA Yan-ping, DING Wan-yu. Material Characteristics of Thin Films [J]. VACUUM, 2020, 57(4): 11-18.
[15] YANG Fei, LI Zhen-hai, LI Jian-chang. Latest Studies on Solid Rocket Engine Nozzle Profile [J]. VACUUM, 2020, 57(1): 40-47.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] LI De-tian, CHENG Yong-jun, ZHANG Hu-zhong, SUN Wen-jun, WANG Yong-jun, SUN Jian, LI Gang, . Preparations and applications of carbon nanotube field emitters[J]. VACUUM, 2018, 55(5): 1 -9 .
[2] ZHOU Bin-bin, ZHANG jian, HE Jian-feng, DONG Chang-kun. Carbon nanotube field emission cathode based on direct growth technique[J]. VACUUM, 2018, 55(5): 10 -14 .
[3] CHAI Xiao-tong, WANG Liang, WANG Yong-qing, LIU Ming-kun, LIU Xing-zhou, GAN Shu-yi. Operating parameter data acquisition system for single vacuum pump based on STM32F103 microcomputer[J]. VACUUM, 2018, 55(5): 15 -18 .
[4] LI Min-jiu, XIONG Tao, JIANG Ya-lan, HE Yan-bin, CHEN Qing-chuan. 20kV high voltage based on double transistor forward converter pulse power supply for metal deburring[J]. VACUUM, 2018, 55(5): 19 -24 .
[5] LIU Yan-wen, MENG Xian-zhan, TIAN Hong, LI Fen, SHI Wen-qi, ZHU Hong, GU Bing. Test of ultra high vacuum in space traveling-wave tube[J]. VACUUM, 2018, 55(5): 25 -28 .
[6] XU Fa-jian, WANG Hai-lei, ZHAO Cai-xia, HUANG Zhi-ting. Application of chemical gases vacuum-compression recovery system in environmental engineering[J]. VACUUM, 2018, 55(5): 29 -33 .
[7] XIE Yuan-hua, HAN Jin, ZHANG Zhi-jun, XU Cheng-hai. Discussion on present situation and development trend of vacuum conveying[J]. VACUUM, 2018, 55(5): 34 -37 .
[8] SUN Li-zhi, YAN Rong-xin, LI Tian-ye, JIA Rui-jin, LI Zheng, SUN Li-chen, WANG Yong, WANG Jian, . Research on distributing law of Xenon in big accumulation chamber[J]. VACUUM, 2018, 55(5): 38 -41 .
[9] HUANG Si, WANG Xue-qian, MO Yu-shi, ZHANG Zhan-fa, YING Bing. Experimental study on similarity law of liquid ring compressor performances[J]. VACUUM, 2018, 55(5): 42 -45 .
[10] CHANG Zhen-dong, MU Ren-de, HE Li-min, HUANG Guang-hong, LI Jian-ping. Reflectance spectroscopy study on TBCs prepared by EB-PVD[J]. VACUUM, 2018, 55(5): 46 -50 .
辽ICP备06004570号-4
Copyright © VACUUM, All Rights Reserved.
Tel: （024）24134406 24110136 24121929　Fax: （024） 24121929　E-mail: zkzk1964@126.com
Powered by Beijing Magtech Co. Ltd