热等静压预应力容器缠绕钢丝优化及数值模拟

doi:10.13385/j.cnki.vacuum.2025.04.07

Abstract

Abstract: The pre-stressed wound steel wires are widely used in the pressure bearing vessel part of equipment such as hot isostatic pressing. Firstly, the numerical model of variable tension vessel winding and the model of equal-tension step division were established. Then, step division method was optimized by using the numerical analysis software and algorithms, and the optimal solution for saving the number of steel wire weights under the precondition of meeting the bearing capacity was obtained. Finally, by establishing a winding simulation model of the container, the correctness of the results was verified by using the finite element analysis software.

Key words: pre-stressed wound, numerical model, finite element analysis, hot isostatic pressing, variable tension container

CLC Number: TB756

MA Yuanchen, LI Zhongren, WANG Ying, AI Chunjiang, SONG Jiaxing, ZHANG Wang, HU Yongjia. Optimization of Pre-Stressed Vessel Winding and Numerical Simulation for Hot Isostatic Pressing[J].VACUUM, 2025, 62(4): 39-43.

References

[1] JAVADZADEH KALAHROUDI F, LIN F, KRAKHMALEV P, et al.Microstructure and fatigue behavior of PM-HIPed Ni-based superalloys and martensitic tool steels: a review[J]. Metals, 2024, 14(10): 1159.
[2] 马福康. 等静压技术[M]. 北京:冶金工业出版社,1992: 367-380.
[3] LEI Z Y, YAO C, GUO W W, et al.Progress on the fabrication of superconducting wires and tapes via hot isostatic pressing[J]. Materials, 2023, 16(5): 1786.
[4] BATMAZ R, ZARDOSHTIAN A, SABISTON T D, et al.An investigation into sinterability improvements of 316L binder jet printed parts[J]. Metallurgical and Materials Transactions A, 2022,53:915-926.
[5] 何山,蔡高参,潘昱枫.钛合金粉末叶轮盘热等静压成形性能[J].粉末冶金材料科学与工程,2024,29(3):172-180.
[6] WEI X F,ZHANG M,MIAO B J,et al.Volumetric capacity enhancement in LiFePO₄ cathodes by hot isostatic pressing[J]. Scripta Materialia, 2021, 194: 113638.
[7] ALEGRE J M, DÍAZ A, GARCÍA R, et al. Mechanical and fatigue properties of Ti-6Al-4V alloy fabricated using binder jetting process and subjected to hot isostatic pressing[J]. Materials, 2024, 17(15): 3825.
[8] LIU T Y, SHI K, ZHAO J,et al.Effect of hot isostatic pressing processing parameters on microstructure and properties of Ti60 high temperature titanium alloy[J]. China Foundry, 2023, 20(1):49-56.
[9] GIZOWSKA M, PITEK M, PERKOWSKI K, et al.Influence of sintering conditions and nanosilicon carbide concentration on the mechanical and thermal properties of Si₃N₄-based materials[J].Materials, 2023, 16; 2079.
[10] 冶金部钢铁研究总院.LRD750／690冷、热等静压机[Z].科技成果,1984.
[11] 张建勇,王云,吴小平.大缸径生产型热等静压机[Z].科技成果,2003.
[12] 四川航空工业川西机器厂.RDJ650/1500-100.1000型大缸径生产型热等静压机[Z].科技成果, 2008.
[13] 吴小平, 钟咏雪, 李育隆.RDJ1250/2000-200.1400热等静压机研制及应用[Z].科技成果, 2018.
[14] 朱志斌,田雪冬.等静压技术的应用与发展[J].现代技术陶瓷,2010,31(1):17-24.
[15] 颜永年. 机械设计中的预应力结构[M].北京:机械工业出版社, 1989: 111-150.
[16] 李世凡,陈国理.绕丝容器等剪应力缠绕设计分析[J].压力容器,1989,6(6):61-65.
[17] 王颖,邢旺,明悦,等.等静压机钢带缠绕式工作缸结构强度数值模拟[J].真空,2021,58(3):82-85.
[18] 陈国理, 陈柏暖, 王作池.超高压容器设计[M].北京:化学工业出版社,1997:91-101.
[19] 焦伟,张建勇,郎利辉. 钢丝缠绕高压容器的有限元结构分析[C]//第七届中日机械技术史及机械设计国际学术会议论文集. 2008:271-275.
[20] 郑长良,任明法,陈浩然. 具有内衬缠绕式压力容器缠绕过程的有限元模拟[J]. 机械强度,2006,28(6):913-918.
[21] 高秋英,王丽丽,王荣忠. 最小二乘法曲线拟合及优化算法研究[J]. 工业控制计算机,2021,34(11):100-101.
[22] 冯守平,石泽,邹瑾. 一元线性回归模型中参数估计的几种方法比较[J]. 统计与决策,2008(24):152-153.
[23] 何志萍. 扁平绕带式压力容器结构特点与研究现状[J]. 辽宁化工,2011,40(10):1062-1064.
[24] 李慧丽,郎利辉,焦伟,等. 预应力钢丝缠绕缸体结构轻量化关键技术[J]. 北京航空航天大学学报,2009,35(7):899-903.
[25] 张少兰. 高静压技术的研究进展及其在食品加工中的应用[J]. 粮油加工与食品机械, 2003(6):64-66.
[26] 刘遵飞. 钢带缠绕式等静压机关键技术研究[D]. 重庆:重庆交通大学,2013.
[27] 凌然. CAE中六面体网格模型的结构简化算法研究[D]. 杭州:杭州电子科技大学,2019.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

Comments

Recommended 10

[1]	LI De-tian, CHENG Yong-jun, ZHANG Hu-zhong, SUN Wen-jun, WANG Yong-jun, SUN Jian, LI Gang, . Preparations and applications of carbon nanotube field emitters[J]. VACUUM, 2018, 55(5): 1 -9 .
[2]	ZHOU Bin-bin, ZHANG jian, HE Jian-feng, DONG Chang-kun. Carbon nanotube field emission cathode based on direct growth technique[J]. VACUUM, 2018, 55(5): 10 -14 .
[3]	CHAI Xiao-tong, WANG Liang, WANG Yong-qing, LIU Ming-kun, LIU Xing-zhou, GAN Shu-yi. Operating parameter data acquisition system for single vacuum pump based on STM32F103 microcomputer[J]. VACUUM, 2018, 55(5): 15 -18 .
[4]	LI Min-jiu, XIONG Tao, JIANG Ya-lan, HE Yan-bin, CHEN Qing-chuan. 20kV high voltage based on double transistor forward converter pulse power supply for metal deburring[J]. VACUUM, 2018, 55(5): 19 -24 .
[5]	LIU Yan-wen, MENG Xian-zhan, TIAN Hong, LI Fen, SHI Wen-qi, ZHU Hong, GU Bing. Test of ultra high vacuum in space traveling-wave tube[J]. VACUUM, 2018, 55(5): 25 -28 .
[6]	XU Fa-jian, WANG Hai-lei, ZHAO Cai-xia, HUANG Zhi-ting. Application of chemical gases vacuum-compression recovery system in environmental engineering[J]. VACUUM, 2018, 55(5): 29 -33 .
[7]	XIE Yuan-hua, HAN Jin, ZHANG Zhi-jun, XU Cheng-hai. Discussion on present situation and development trend of vacuum conveying[J]. VACUUM, 2018, 55(5): 34 -37 .
[8]	SUN Li-zhi, YAN Rong-xin, LI Tian-ye, JIA Rui-jin, LI Zheng, SUN Li-chen, WANG Yong, WANG Jian, . Research on distributing law of Xenon in big accumulation chamber[J]. VACUUM, 2018, 55(5): 38 -41 .
[9]	HUANG Si, WANG Xue-qian, MO Yu-shi, ZHANG Zhan-fa, YING Bing. Experimental study on similarity law of liquid ring compressor performances[J]. VACUUM, 2018, 55(5): 42 -45 .
[10]	CHANG Zhen-dong, MU Ren-de, HE Li-min, HUANG Guang-hong, LI Jian-ping. Reflectance spectroscopy study on TBCs prepared by EB-PVD[J]. VACUUM, 2018, 55(5): 46 -50 .

Optimization of Pre-Stressed Vessel Winding and Numerical Simulation for Hot Isostatic Pressing

Abstract

Cite this article

share this article

References

Related Articles 5

Metrics

Comments

Recommended 10

[1]	CHEN Qiang, ZHANG Wei, DANG Tao, JIN Yangtao, CAO Xueping. Natural Vibration Characteristics and Seismic Response Analysis of Vacuum Assisted Steel-Concrete Arch Bridge [J]. VACUUM, 2025, 62(4): 81-88.
[2]	LI Hongju, LIU Shibing, LIU Tianyu, ZHAO Jun, SHI Kun, LI Chongyang, LI Xinqi. Study on the Microstructure and Properties of BT22 Alloy Prepared by Vacuum Induction Magnetic Levitation Melting [J]. VACUUM, 2025, 62(4): 59-63.
[3]	ZENG Huan, DENG Jia-liang, SUN Zhi-he. Design of the 250mm Caliber Cryopump [J]. VACUUM, 2020, 57(2): 13-16.
[4]	SUN Zhi-ming, HE Chao, ZHANG Ying-li, ZHU Zhi-peng, YUE Xiang-ji, ZHANG Bin, BA De-chun. Design and finite element analysis of large-scale horizontal vacuum container [J]. VACUUM, 2019, 56(2): 26-30.
[5]	SHEN Fu-bo, WANG Jie, ZHAI Yue, ZHOU Zhi-peng. Light shell design of low temperature adsorption bed and its optimization [J]. VACUUM, 2018, 55(6): 42-44.