压力模拟试验过程中引压管路标定方法研究*

doi:10.13385/j.cnki.vacuum.2020.01.10

真空 ›› 2020, Vol. 57 ›› Issue (1): 51-55.doi: 10.13385/j.cnki.vacuum.2020.01.10

压力模拟试验过程中引压管路标定方法研究^*

黄念之, 武越, 武飞, 李琼, 张丽娜

北京卫星环境工程研究所,北京 100094

收稿日期:2019-08-18 出版日期:2020-01-25 发布日期:2020-03-17
通讯作者: 武越,高级工程师。
作者简介:黄念之(1993-),男,河北省邢台市人,硕士,助理工程师。
基金资助:
载人航天领域预先研究项目(020102)

Study on Calibration Method of Pressure Pipeline during Pressure Simulation Test

HUANG Nian-zhi, WU Yue, WU Fei, LI Qiong, ZHANG Li-na

Beijing Institute of Spacecraft Environment Engineering, Beijing 100094, China

Received:2019-08-18 Online:2020-01-25 Published:2020-03-17

摘要/Abstract

摘要： 压力模拟试验通过精准控制试件附近压力的变化,模拟出试验件在实际工作过程中的气流环境,考察试验件通气效能及结构可靠性。文章结合试验过程中测量特定位置压力值的需求,提出一种引压管路测压的标定方法。在标定试验中,使用测量规通过引压管路得到初始压力值,用标准真空规得到待测位置的标准压力值。利用MATLAB选择合适的拟合函数并将两组数值拟合出一组修正关系式,后续试验中将测量规的压力值通过关系式修正即可得出待测位置的准确压力值。经试验验证,该标定方法能够有效消除引压管路对压力测量值的影响,保证压力模拟试验的顺利进行。

关键词: 压力模拟试验, 引压管路, 标定试验, 修正关系式

Abstract: The pressure simulation test simulates the airflow condition of the specimen in the practical working processes by precisely controlling the surrounding pressure, for the purpose of testing the ventilation efficiency and structural reliability of the specimen. In this study, to meet the demand that the pressure at a specific position can be measured during the test, a calibration method of pressure measurement via the pressure pipeline is proposed. In the calibration test, the primary pressure value that using the pressure pipeline is measured by the measuring gauge and the standard pressure value could be measured by the standard gauge. The proper fitting function could be chosen in MATLAB and a set of correction formula could be fitted by the pressure value. The as-measured value could be corrected by the formula to obtain an accurate pressure value in the subsequent test. It is verified by experiments that the calibration method can effectively eliminate the influence of the pressure piping on the pressure measurement and ensure the implementation of the pressure simulation test.

Key words: pressure simulation test, pressure pipeline, calibration test, correction formula

中图分类号:

TB772

黄念之, 武越, 武飞, 李琼, 张丽娜. 压力模拟试验过程中引压管路标定方法研究^*[J]. 真空, 2020, 57(1): 51-55.

HUANG Nian-zhi, WU Yue, WU Fei, LI Qiong, ZHANG Li-na. Study on Calibration Method of Pressure Pipeline during Pressure Simulation Test[J]. VACUUM, 2020, 57(1): 51-55.

参考文献

[1] 陈涛, 王正义, 许忠旭. 航天器密封舱真空热试验用压控系统设计与实现[J]. 航天器环境工程, 2010, 27(6):708-710+672.
[2] 武越, 鄂东梅, 杜鹏, 等. 航天器密封舱连接处漏率检测方法[J]. 真空, 2018, 55(6):1-4.
[3] 谢壮宁, 顾明, 倪振华. 复杂测压管路系统动态特性的通用分析程序[J]. 同济大学学报(自然科学版), 2003(6):702-708.
[4] 马文勇, 刘庆宽, 刘小兵,等. 风洞试验中测压管路信号畸变及修正研究[J]. 实验流体力学, 2013, 27(4):71-77.
[5] 王维新, 谢壮宁. 测压传压管路系统动态特性的试验分析[J]. 西北大学学报(自然科学版), 2005(4):392-396.
[6] He Y C, Liang Q S, Li Z, et al.Accurate estimation of tube-induced distortion effects on wind pressure measurements[J]. Journal of Wind Engineering & Industrial Aerodynamics, 2019, 188: 260-268.
[7] Štefe M, Svete A, Kutin J.Development of a dynamic pressure generator based on a loudspeaker with improved frequency characteristics[J]. Measurement, 2018, 122: 212-219.
[8] 吕永志, 张丕状. 递归滤波在测压管路信号修正中的应用[J]. 中国测试, 2016, 42(9):116-119+125.
[9] 金耀华, 吕凡任, 邵红才. 基于分段曲线拟合的先期固结压力数值模型[J]. 四川建筑科学研究, 2013, 39(5):160-163.
[10] 肖峻, 李鑫, 赵孟坤, 等. 分段线性拟合在轮对压装机压力标定中的应用[J]. 组合机床与自动化加工技术, 2016(4):146-149.
[11] 韩芳, 王爽心. 基于MATLAB工具箱的机组负荷分配的建模与优化[J]. 仪器仪表学报, 2005(S2):768-771.
[12] Wen H, Ma J, Zhang M J.The comparison research of nonlinear curve fitting in Matlab and LabVIEW[C]// IEEE Symposium on Electrical & Electronics Engineering (EEESYM). IEEE, 2012: 74-77.
[13] Klimash V S, Klimash S V, Zhemchuzhina E A.Investigation of an electrical complex using specialized modules in the MATLAB environment[J]. Russian Electrical Engineering, 2017, 88(9): 568-572.
[14] Utegulov B B, Utegulov A B, Uakhitova A B.Modeling method for measuring the admittance of insulation in a network with an isolated neutral voltage up to 1000 V in mines using Matlab/Simulink[J]. Journal of Mining Science, 2017, 53(2): 282-290.
[15] 岳鹏, 程敏熙. 用MatLab曲线拟合工具箱处理物理

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

压力模拟试验过程中引压管路标定方法研究^*

Study on Calibration Method of Pressure Pipeline during Pressure Simulation Test

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

Metrics

本文评价

推荐阅读 10

[1]	何剑锋, 黄卫军, 董长昆. 新型同轴电极结构碳纳米管场发射电离计[J]. 真空, 2019, 56(6): 12-15.
[2]	周彬彬, 张建, 何剑锋, 董长昆. 基于 CVD 直接生长法的碳纳米管场发射阴极[J]. 真空, 2018, 55(5): 10-14.