欢迎访问沈阳真空杂志社 Email Alert    RSS服务

真空 ›› 2023, Vol. 60 ›› Issue (4): 13-17.doi: 10.13385/j.cnki.vacuum.2023.04.03

• 薄膜 • 上一篇    下一篇

离子溅射仪油雾污染对溅射基底的影响

彭波1, 袁秋2, 孟晓敏3   

  1. 1.重庆安美科技有限公司 镀膜事业部,重庆 400707;
    2.重庆机电职业技术大学机械工程学院,重庆 402760;
    3.重庆诺奖二维材料研究院有限公司 科技研发中心,重庆 400799
  • 收稿日期:2022-09-15 出版日期:2023-07-25 发布日期:2023-07-26
  • 通讯作者: 孟晓敏,工程师。
  • 作者简介:彭波(1986-),男,重庆市人,本科,工程师。

Influence of Oil Mist Pollution on Sputtering Substrate of Ion Sputtering Instrument

PENG Bo1, YUAN Qiu2, MENG Xiao-min3   

  1. 1. Coating Business Department, Chongqing Anmei Technology Co., Ltd., Chongqing 400707, China;
    2. Chongqing Vocational and Technical University of Mechatronics, Chongqing 402760, China;
    3 Science And Technology R & D Center Chongqing Nobel 2D Materials Research Institute Co., Ltd., Chongqing 400799, China
  • Received:2022-09-15 Online:2023-07-25 Published:2023-07-26

摘要: 利用光学显微镜、场发射扫描电子显微镜、原子力显微镜以及能谱仪研究了油雾污染对溅射基底(硅片、称量纸、铜箔和载玻片)微观形貌和元素含量的影响。结果表明:溅射沉积不同时间后,硅片基底上均出现球状颗粒,且颗粒随着溅射时间延长而聚集或长大;溅射前硅片的碳含量为4.55%,经溅射沉积50s后其表面碳含量约为31.55%;铜箔和称量纸溅射沉积50s后的光学形貌与溅射前差异不大,未出现球状颗粒;载玻片溅射沉积50s的光学形貌与硅片的接近,表面随机分布着球状颗粒。硅基类基底对油雾污染极其敏感,表现为经过溅射处理后样品表面分布着球状颗粒,且碳元素质量分数约为溅射前的7~8倍。

关键词: 离子溅射仪, 油雾分子, 基底, 球状颗粒

Abstract: The effect of oil mist pollution on micromorphology and element content of sputtered substrate(silicon wafer, weighing paper, copper foil and glass slide) was studied through optical microscope, field emission scanning electron microscope, energy spectrometer and atomic force microscope. The results show that after sputtering deposition for different times, spherical particles appear on the silicon substrate, and the particles gather or grow with the increase of sputtering time. The carbon content of silicon wafer before sputtering is 4.55%, and it rises to about 31.55% after 50s of sputtering deposition. The optical morphology of copper foil and weighing paper after sputtering deposition for 50s has little difference from the sample before sputtering, and there is no spherical particle. The optical morphology of glass slide after sputtering deposition for 50s is similar to that of the silicon slide, spherical particles are randomly distributed on the surface. The silicon substrate is extremely sensitive to oil mist pollution, which is characterized by spherical particles distributed on the surface of the sample after sputtering treatment,and the mass fraction of carbon is about 7-8 times of that before sputtering.

Key words: ion sputter instrument, oil mist molecule, substrate, spherical particles

中图分类号:  TN16;TB321

[1] 马原辉, 陈学广, 刘哲. 扫描电镜粉末样品的制备方法[J]. 实验室科学, 2011, 14(1): 148-150.
[2] 程鹏翥. 离子溅射在物质微观组织结构研究中的应用[J]. 物理, 1984, 13(7): 410-414.
[3] 辛昕. 分析扫描电镜粉末样品的制备方法[J]. 科技展望, 2015(27): 64.
[4] 李剑平. 扫描电子显微镜对样品的要求及样品的制备[J]. 分析测试技术与仪器, 2007, 13(1): 74-77.
[5] 郑东. 扫描电镜非导电样品的等离子溅射镀膜方法[J]. 中国现代教育装备, 2007(10): 19-20.
[6] PRIVAL H G.A model of the ion sputtering process[J]. Surface Science, 1978, 76(2): 443-463.
[7] VACÍK J, HORÁK P, BAKARDJIEVA S, et al. Ion sputtering for preparation of thin MAX and MXene phases[J]. Radiation Effects and Defects in Solids, 2020, 175(1/2): 177-189.
[8] 王醒东, 林中山, 张立永, 等. 扫描电子显微镜的结构及对样品的制备[J]. 广州化工, 2012, 40(19): 28-30.
[9] 焦汇胜, 李香庭. 扫描电镜能谱仪及波谱仪分析技术[M]. 长春: 东北师范大学出版社, 2011.
[10] 余凌竹, 鲁建, 吴永豪, 等. 离子溅射喷金对陶瓷类样品扫描电镜形貌观察的影响[J]. 实验科学与技术, 2020, 18(2): 21-25.
[11] 张世伟. 真空镀膜技术与设备[M]. 北京: 化学工业出版社, 2007.
[12] MOTIHIRO T, OZAWA F, TAGA Y.Ejection angular distribution of argon in sputtering of a gold target[J]. Thin Solid Films, 1985, 128(1/2): 37-39.
[13] HARRIS N S, 鲁浩长. 机械泵的返油(节译)[J]. 真空, 1979(5): 69-75.
[14] 易新建, 徐日炳. 离子溅射Ti、Pt、Au的研究[J]. 华中工学院学报, 1980(4): 232-237.
[15] 李云奇. 真空镀膜[M]. 北京: 化学工业出版社, 2012.
[16] 陈国平. 薄膜物理与技术[M]. 南京: 东南大学出版社, 1993.
[17] PEA-TORRES A, ALI A, STAMATAKIS M, et al.Indirect mechanism of Au adatom diffusion on the Si(100) surface[J]. Physical Review C, 2022, 105(20): 205411.
[18] PALM H, ARBES M, SCHULZ M.Fluctuations of the Au-Si(100) Schottky barrier height[J]. Physical Review Letters, 1993, 71(14): 2224-2227.
[19] AL-SALLAMI W, PARSAEIAN P, DORGHAM A, et al.Oil-soluble ionic liquid to lubricate silicon[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2021, 235(10): 1995-2006.
[20] STOYANOV P, CHROMIK R R.Scaling effects on materials tribology: from macro to micro scale[J]. Materials, 2017, 10(5): 550.
[1] 秦丽丽, 董茂进, 冯煜东, 韩仙虎, 蔡宇宏, 王毅, 李小金, 马凤英. 超高水氧阻隔膜研究进展*[J]. 真空, 2023, 60(1): 23-29.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 李得天, 成永军, 张虎忠, 孙雯君, 王永军, 孙 健, 李 刚, 裴晓强. 碳纳米管场发射阴极制备及其应用研究[J]. 真空, 2018, 55(5): 1 -9 .
[2] 周彬彬, 张 建, 何剑锋, 董长昆. 基于 CVD 直接生长法的碳纳米管场发射阴极[J]. 真空, 2018, 55(5): 10 -14 .
[3] 柴晓彤, 汪 亮, 王永庆, 刘明昆, 刘星洲, 干蜀毅. 基于 STM32F103 单片机的单泵运行参数数据采集系统[J]. 真空, 2018, 55(5): 15 -18 .
[4] 李民久, 熊 涛, 姜亚南, 贺岩斌, 陈庆川. 基于双管正激式变换器的金属表面去毛刺 20kV 高压脉冲电源[J]. 真空, 2018, 55(5): 19 -24 .
[5] 刘燕文, 孟宪展, 田 宏, 李 芬, 石文奇, 朱 虹, 谷 兵, 王小霞 . 空间行波管极高真空的获得与测量[J]. 真空, 2018, 55(5): 25 -28 .
[6] 徐法俭, 王海雷, 赵彩霞, 黄志婷. 化学气体真空 - 压缩回收系统在环境工程中应用研究[J]. 真空, 2018, 55(5): 29 -33 .
[7] 谢元华, 韩 进, 张志军, 徐成海. 真空输送的现状与发展趋势探讨(五)[J]. 真空, 2018, 55(5): 34 -37 .
[8] 孙立志, 闫荣鑫, 李天野, 贾瑞金, 李 征, 孙立臣, 王 勇, 王 健, 张 强. 放样氙气在大型收集室内分布规律研究[J]. 真空, 2018, 55(5): 38 -41 .
[9] 黄 思 , 王学谦 , 莫宇石 , 张展发 , 应 冰 . 液环压缩机性能相似定律的实验研究[J]. 真空, 2018, 55(5): 42 -45 .
[10] 常振东, 牟仁德, 何利民, 黄光宏, 李建平. EB-PVD 制备热障涂层的反射光谱特性研究[J]. 真空, 2018, 55(5): 46 -50 .