真空 ›› 2025, Vol. 62 ›› Issue (2): 1-11.doi: 10.13385/j.cnki.vacuum.2025.02.01
• 真空应用 • 下一篇
董海义, 何平, 李琦, 郭迪舟, 王徐建, 马永胜, 刘佰奇, 黄涛, 张磊, 孙飞, 刘天锋, 田丕龙, 杨雨晨, 杨奇, 王鹏程, 刘佳明, 刘顺明, 孙晓阳, 朱邦乐, 谭彪
DONG Haiyi, HE Ping, LI Qi, GUO Dizhou, WANG Xujian, MA Yongsheng, LIU Baiqi, HUANG Tao, ZHANG Lei, SUN Fei, LIU Tianfeng, TIAN Pilong, YANG Yuchen, YANG Qi, WANG Pengcheng, LIU Jiaming, LIU Shunming, SUN Xiaoyang, ZHU Bangle, TAN Biao
摘要: 高能同步辐射光源(High Energy Photon Source,HEPS)是束流能量为6 GeV、流强为200 mA的第四代光源。HEPS加速器由直线加速器、增强器、储存环和将这三者连接在一起的三条输运线组成,其中储存环是HEPS的核心部分。本文概述了储存环真空系统的特点,并对一些关键部件的设计和工艺进行了说明。储存环真空系统设计的主要技术难点是研制挤压成型的薄壁铬锆铜真空盒并在其内表面镀吸气剂膜,以解决真空盒上同步辐射光热沉积大和真空盒(内径22 mm)流导受限的问题。目前已完成所有真空部件的生产,储存环真空系统于2023年11月开始正式安装,并于2024年7月完成。通过对真空系统分段在线烘烤和吸气剂膜激活,其平均静态真空达到5×10-8 Pa,优于设计指标。这标志着HEPS储存环真空系统成功实现了从真空盒、RF屏蔽波纹管、光子吸收器等非标设备的设计加工到磁控溅射镀吸气剂膜、现场安装以及吸气剂膜的在线激活等各个技术环节的闭环验证。经历20余天的试运行,HEPS储存环流强达到12 mA,HEPS加速器取得了里程碑式进展。
中图分类号: TL50
[1] QIN Q, CAO J S, CHEN F S, et al.Progress of HEPS accelerator system design[C]// Proceedings of the 10th International Particle Accelerator Conference. Melbourne, Australia:IPAC, 2019: 633-635. [2] JIAO Y, CUI X, DUAN Z, et al.Beam dynamic study in the HEPS storage ring[C]// Proceedings of the 10th International Particle Accelerator Conference. Melbourne, Australia:IPAC, 2019: 1203-1207. [3] HEPS初设报告第三册-加速器-V2-5[Z]. [4] KERSEVAN R, ADY M.Recent developments of monte-carlo codes MolFlow+ and SynRad+[C]// Proceedings of the 10th International Particle Accelerator Conference. Melbourne, Australia, 2019: 1327-1330. [5] 董海义,李琦,彭晓华,等. BEPCII储存环真空系统性能[J]. 真空, 2008,45(4): 29-31. [6] AL-DMOUR E, AHLBACK J, EINFELD D, et al.Diffraction-limited storage-ring vacuum technology[J]. Journal of Synchrotron Radiation, 2014, 21(5): 878-883. [7] SERAPHIM R M, BAGNATO O R, FERRAZ R O, et al.Vacuum system design for the SIRIUS storage ring[C]//6th International Particle Accelerator Conference. Richmond, VA, USA: IPAC, 2015: 2744-2746. [8] 王徐建,檀财旺,郭迪舟,等. CuCrZr/316LN合金管激光焊接头组织与性能[J]. 焊接学报,2023,44(2):123-128. [9] 王徐建,王廷,何平,等. CuCrZr/Inconel 625电子束焊接接头组织与性能[J]. 焊接学报,2022,43(9):92-97. [10] DONG H Y, SONG H, LI Q, et al.The vacuum system of the BEPCII storage ring[J]. Nuclear Instruments and Methods in Physics Research A, 2010, 620(2/3): 166-170. [11] CARTER J A, BILLETT B, BRAJUSKOVIC B, et al.Final design of the aps-upgrade storage ring vacuum system[C]// NAPAC2019. Lansing, MI, USA: JACoW Publishing, 2019: 315-317. [12] DEPAOLA F, AMUNDSEN C, SHARMA S.Manufacturing of photon beam-intercepting components from CuCrZr[C]// 9th Edition of the Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conference. Barcelona, Spain, 2016: 233-235. [13] CHIGGIATO P, PINTO P C.Ti-Zr-V non-evaporable getter films: from development to large scale production for the Large Hadron Collider[J]. Thin Solid Films, 2006, 515(2): 382-388. [14] HE P.Accelerator vacuum technology challenges for next-generation synchrotron-light sources[C]//Proceedings of IPAC 2017. Copenhagen, Denmark,2017: 4830-4835. [15] PORCELLI T, BUSETTO B, DINH F, et al.SAES experience in NEG coating of challenging vacuum chambers[C]// 14th Interational Particle Accelerator Conference. Venice, ltaly: IPAC, 2023: 4316-4319. [16] 马永胜,杨雨晨,景泳淼,等. 薄膜缺陷研究进展综述[J]. 表面技术,2021,50(3):91-100. [17] PINTO P C, BARTOVA B, HOLLIGER B, et al.Development and production of non evaporable getter coatings for the vacuum chambers of the 3 GeV storage ring of MAX IV[C]//Proceedings of IPAC. Richmond, USA, 2015: 3145-3147. [18] MALYSHEV O B, VALIZADEH R, HANNAH A N.Pumping properties of Ti-Zr-Hf-V non-evaporable getter coating[J]. Vacuum,2014,100: 26-28. [19] NALLIN P H, GOMES G R, FERRAZ R O, et al.The Sirius heating system for the in-situ NEG activation[C]// Proceedings of the 10th International Particle Accelerator Conference. Melbourne, Australia: IPEC, 2019: 4109-4111. [20] MULVANY O K, BILLETT B, BRAJUSKOVIC B, et al.NEG-coated copper vacuum chambers for the APS-upgrade storage ring vacuum system[C]//North American Particle Accelerator Conference (NAPAC'19). Geneva, Switzerland, 2019: 477-479. |
[1] | 谭彪, 黄涛, 王鹏程, 刘佳明, 关玉慧, 刘顺明, 孙晓阳, 董海义. 中国散裂中子源RCS真空系统*[J]. 真空, 2021, 58(3): 1-6. |
[2] | 邢银龙, 吴杰峰, 刘志宏, 李波, 周能涛. 316LN异型真空盒超高真空表面处理工艺的研究*[J]. 真空, 2019, 56(6): 27-29. |
|