多室隧道连续式真空烧结炉及热处理炉控制系统的设计*

doi:10.13385/j.cnki.vacuum.2021.01.16

Abstract

Abstract: The system realizes tantalum anode block sintering process, including three thermal processes of presintering, sintering and cooling, as well as the control of metronomic feed in and out, auxiliary machine and other parts. Its control system realizes the full-automatic control function, which adopts the distributed structural design, system opening, hierarchical control, system construction and configuration scheme integrating detection, control, management, remote diagnosis and communication. The whole control strategy and operation control method of the whole process integrated control system for complex production and manufacturing of multi chamber tunnel continuous vacuum sintering and heat treatment equipment are developed to realize the optimization and optimal control of production process.

Key words: continuous vacuum furnace, vacuum sintering, beat, automatic, distributed, control strategy

CLC Number:

TH33

WU Ai-rong, ZHANG Feng, MA Qiang, XI Xiao-jing. Design of Control System for Multi Chamber Tunnel Continuous Vacuum Sintering Furnace and Heat Treatment Furnace[J].VACUUM, 2021, 58(1): 78-81.

References

[1] 马强. 2200℃片式钽电容器真空烧结炉的研制[J]. 真空, 2006, 43(3): 42-44.
[2] 蒋燕. 横型四室连续真空烧结炉的优势[J]. 科技视界, 2013(1): 171-172.
[3] 李雪峰, 龙国梁, 李晓明, 等. 真空脱蜡烧结炉中差压式载气脱蜡原理的应用[J]. 真空, 2020, 57(4): 32-35.
[4] 王智荣, 马强, 李雪峰, 等. 多室隧道连续式真空烧结炉及热处理炉的研制与应用[J]. 真空, 2019, 56(5): 6-11.
[5] 中华人民共和国航天工业部部标准. QJ1428-1988. 热处理炉温控制与测量[S]. 北京: 中华人民共和国航天工业部, 1988: 1-10.
[6] 王锦标. 计算机控制系统[M]. 北京: 清华大学出版社. 2004.
[7] 杨劲松. 计算机工业控制[M]. 北京: 中国电力出版社, 2003.
[8] 朱武. 真空测量与控制[M]. 合肥: 合肥工业大学出版社, 2008.
[9] 齐蓉. 可编程计算机控制器原理及应用[M]. 西安: 西北工业大学出版社, 2002.
[10] 廖常初. S7-300/400 PLC应用技术[M]. 北京: 机械工业出版社, 2005.
[11] 夏德钤, 翁贻方, 自动控制理论[M]. 4版. 北京: 机械工业出版社, 2012.
[12] 刘阳兴, 雷宏军. 多室连续式真空炉的研制与应用[J]. 真空, 2005, 42(2): 18-22.
[13] 阎承沛. 真空热处理工艺与设备设计[M]. 北京: 机械工业出版社, 2003.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

Comments

Recommended 10

[1]	WANG Jie, KANG Song, DONG Chang-kun. Study on Working Performance for Low Pressure Carbon Nanotube Micro Sensor[J]. VACUUM, 2021, 58(1): 1 -5 .
[2]	LI Fu-song, WANG Wen-jun, LIN Wei-jian, PAN Ya-juan. Design of Intelligent Screw Air Compressor Performance Testing System[J]. VACUUM, 2021, 58(1): 19 -22 .
[3]	YANG Nai-heng. Analysis and Discussion on the Vacuum Pump for Vacuum Degassing[J]. VACUUM, 2021, 58(1): 29 -32 .
[4]	WANG Xun. Vacuum Measurement and Application for Aerospace[J]. VACUUM, 2021, 58(1): 15 -18 .
[5]	ZHANG Shi-wei, SUN Kun, HAN Feng. Discussion on Several Common Problems in Screw Vacuum Pump Design[J]. VACUUM, 2021, 58(1): 23 -28 .
[6]	. [J]. VACUUM, 2020, 57(6): 84 -86 .
[7]	CHAI Hao, JIA Jun-wei, WANG Bin, LI Peng, CUI Shuang, FENG Xu, LI Wei, LIU Zhan, LI Shao-fei, CHEN Quan. Design and Characteristic Study on Compact Microwave ECR Plasma Source[J]. VACUUM, 2021, 58(1): 6 -9 .
[8]	ZHANG Xiao, LIU Zhao-xian, MENG Dong-hui, REN Guo-hua, WANG Li-na, YAN Rong-xin. Simulation Study on Porous Graphene Helium Permeation[J]. VACUUM, 2021, 58(1): 10 -14 .
[9]	CAI Xiao, CAO Zeng, ZHANG Wei, LI Rui-jun, HUANG Yong. Development of Pre-pumping System for Vacuum Chamber of HL-2M[J]. VACUUM, 2021, 58(1): 33 -37 .
[10]	ZHANG Yu-chen, ZHANG Hai-bao, CHEN Qiang. Review on Semi-Conductive ZnO Thin Film Prepared by HiPIMS[J]. VACUUM, 2021, 58(1): 72 -77 .

Design of Control System for Multi Chamber Tunnel Continuous Vacuum Sintering Furnace and Heat Treatment Furnace

Abstract

Cite this article

share this article

References

Related Articles 5

Metrics

Comments

Recommended 10

[1]	LIU Dian-hai, LI Lun, ZHOU Bo, ZHAO Ji-bin. An Automatic Control Method Based on Laser Peening to Improve Residual Stress of Additive Manufacturing Parts [J]. VACUUM, 2020, 57(2): 83-87.
[2]	WANG Zhi-rong, MA Qiang, LONG Guo-liang, LI Xue-feng, LIU Cheng. Development and Application of Multi-Chamber Tunnel Continuous Vacuum Sintering Furnace and Heat Treatment Furnace [J]. VACUUM, 2019, 56(5): 6-11.
[3]	QI Song-song, JING Jia-rong, DONG De-sheng, DONG Dong, WANG Fei, ZHANG Rui. Design of Pressure Regulating System for Vacuum Thermal Test Equipment [J]. VACUUM, 2019, 56(4): 62-64.
[4]	YANG Song, ZHANG Shi-qiang, ZHOU Jin, KONG Xiao-li, LI Hong-yu, ZHAO Wei. Numerical calculation of thermoacoustic engine with distributed parameter method [J]. VACUUM, 2019, 56(3): 66-70.
[5]	JI Ming, SUN Liang, YANG Min-bo. Design of automatic sealing and locking scheme for lunar sample [J]. VACUUM, 2018, 55(6): 24-27.