VACUUM ›› 2024, Vol. 61 ›› Issue (1): 83-86.doi: 10.13385/j.cnki.vacuum.2024.01.14
• Vacuum Metallurgy and Thermal Engineering • Previous Articles Next Articles
CHE En-lin1, WANG Zhen-hong2, SU Ning1, CHEN Ding1, LIU Jun1, CHENG Bo-long1, DAI Yu-bo1
CLC Number: TB79
| [1] | 杜沛南, 姚力夫, 李传锋, 等. 锆-2合金粉末制备新工艺研究[J]. 粉末冶金技术, 2018, 36(1): 55-60. |
| [2] | 杨红艳, 吕俊男, 张瑞谦, 等. 锆合金表面Cr涂层在高温水蒸气环境中氧化行为研究[J]. 核动力工程,2023, 44(S1): 168-175. |
| [3] | 孙国成, 张国梁, 陈刘涛, 等. 锆合金包壳在典型高温空气中热氧化膜特性的初步研究[J]. 材料保护, 2023, 56(6): 190-193. |
| [4] | 李启军, 章林, 李兵兵, 等. 氢化脱氢法制备Nb-Ti基合金粉末[J]. 稀有金属材料与工程, 2020, 49(1): 93-100. |
| [5] | 刘双, 邹亮华, 王晓明. 均相钴催化氨硼烷的脱氢及转移氢化反应的研究进展[J]. 有机化学, 2023, 43(5): 1713-1725. |
| [6] | 李飞, 李强. 低磁化率锆合金的研究进展[J]. 有色金属材料与工程, 2023, 44(1): 40-47. |
| [7] | 王文科. 氢化锆表面氮化膜层生长机制与阻氢性能研究[D]. 北京:北京科技大学, 2023. |
| [8] | 魏振河, 廖军华, 沙江波. 氢化脱氢法制备Nb-Si基超高温合金粉末的研究[J]. 精密成形工程, 2022, 14(11): 153-162. |
| [9] | 王峰. 储氢合金氢化/脱氢反应动力学的通用变体积建模与实验研究[D]. 西安:西北大学, 2022. |
| [10] | 陈佳男, 丁旺旺, 朱科研, 等. 3D打印用近球形Nb521合金粉末的流化制备[J]. 粉末冶金技术, 2022, 40(2): 126-130. |
| [11] | 刘悦, 唐若兰, 贾世召, 等. 氢化钛粉脱氢及球形钛粉制造方法的研究进展[J]. 粉末冶金工业, 2022, 32(2): 105-109. |
| [12] | 谢培培. 节杆菌催化醋酸氢化可的松C1,2位脱氢工艺建立及高产菌株选育[D]. 天津:天津科技大学, 2022. |
| [13] | 刘锐鑫. 钙有机配合物催化硅烷与末端炔烃脱氢偶联反应研究[D]. 上海:上海师范大学, 2022. |
| [14] | 马强, 边悦, 王占奇. 大型连续式氢化脱氢制取高纯钛粉设备的研制与应用[J]. 真空科学与技术学报, 2022, 42(10): 786-790. |
| [15] | 陈晓敏, 冯兆路, 白雪峰. 乙醇还原制备氮掺杂多孔碳负载纳米钯催化全氢化N-乙基咔唑脱氢[J]. 化学与粘合, 2021, 43(4): 241-246. |
| [16] | 王征, 蔺庆, 马宁, 等. 钴催化剂均相催化氢化以及脱氢反应的研究进展[J]. 中国科学:化学, 2021, 51(8): 995-1017. |
| [17] | HUANG K, ELTON E S, HENDERSON H B, et al.The hydride-dehydride process combined with plasma spheroidization: an alternative route for producing spherical metallic powders of U-6 wt.% Nb[J]. Advanced Powder Technology, 2023, 34(4): 103992. |
| [18] | SHAO Y, YANG F, CHEN C, et al.Ti6Al4V alloy fabricated by gelcasting based on low-oxygen gel system using hydride-dehydride titanium alloy powders[J]. Powder Technology, 2022, 395: 534-544. |
| [19] | GUZMÁN J, DE MOURA NOBRE R, NUNES E R, et al. Laser powder bed fusion parameters to produce high-density Ti-53% Nb alloy using irregularly shaped powder from hydride-dehydride (HDH) process[J]. Journal of Materials Research and Technology, 2021, 10: 1372-1381. |
| [20] | DAS P, LEE Y S, LEE S C, et al.Computational design of a new palladium alloy with efficient hydrogen storage capacity and hydrogenation-dehydrogenation kinetics[J]. International Journal of Hydrogen Energy, 2023, 48(49): 18795-18803. |
| [1] | LIU Zhong-bo. Application of Vacuum System in Simulating Low-pressure Area Environment on Martian Surface [J]. VACUUM, 2024, 61(1): 64-67. |
| [2] | ZHAO Zhen-yun, CHEN Ding-jun, GUO Yuan-meng, YANG Hao, DONG Shuai, SUN Tie-sheng, HUANG Mei-dong. Hydrophobic Properties of Chromium Nitride Thin Films at Different Temperatures [J]. VACUUM, 2024, 61(1): 27-33. |
| [3] | LIU Zhong-bo. Application of Vacuum in High Altitude Simulation Systems [J]. VACUUM, 2023, 60(6): 84-86. |
| [4] | FENG Hong-qi, LI Sen, YANG Run-ze, WU Yue, SUN Juan. Development of an Environmental Control and Life Support System Thermal Test Equipment for Extreme Environment [J]. VACUUM, 2023, 60(5): 86-91. |
| [5] | LI Ping-chuan, XU Li, ZHAO Jie, ZHANG Fan, XIONG Si-wei, JIAN Yi, ZHANG Zheng-hao, TANG De-li. Numerical Simulation and Experimental Research on Miniaturized Anode Layer Thruster [J]. VACUUM, 2023, 60(4): 36-41. |
| [6] | LUO Jun-wen, LI Zhi-fang. Development of Clean Coating Production Line for Printed Circuit Board [J]. VACUUM, 2023, 60(2): 26-29. |
| [7] | LI Lin, MENG Xian-cai, YUAN Jing-sheng, BI Hai-lin, ZUO Gui-zhong, HU Jian-sheng. Characteristic Analysis of Deuterium Desorption in Liquid Lithium [J]. VACUUM, 2023, 60(2): 51-56. |
| [8] | LIU Yang, ZHANG Ya-nan, GAO Sheng-yuan, ZHAO Zhen-yun, ZHENG Ming-hao, HUANG Mei-dong. Research on Mechanical Properties of Zr/ZrN Multilayers by Multi-arc Ion Plating [J]. VACUUM, 2022, 59(5): 28-31. |
| [9] | ZHOU Yuan, RAN Ao, WU Yi-heng, XIE Yuan-hua, LIU Kun. Design and Analysis of High Vacuum Chamber for MEMS Ion Source Testing Based on ANSYS [J]. VACUUM, 2022, 59(3): 16-19. |
| [10] | TIAN Ming-li, QIU Li, DONG Yun-ning, CHEN Jun-ru, CHEN You-qi, TANG Rong, ZHANG Ji-feng. An Application of Ultrasensitive Leak Detection Technology Integrated in High Pumping Speed Automatic Exhaust Table [J]. VACUUM, 2022, 59(3): 63-67. |
| [11] | LI Jian-peng, ZHANG Chi, LI Jian-chang. Latest Studies on Fatigue Failure of Flexible Electronic Devices [J]. VACUUM, 2021, 58(5): 11-15. |
| [12] | LUO Jun-wen. Development of Large-Scale Metal Coil Surface Modification Continuous Roll to Roll Coating Production Line [J]. VACUUM, 2021, 58(3): 35-38. |
| [13] | YU Hua-jun, ZHAO Xi-jun, WU Rui-jun. Solutions for Asymmetrical Target Erosion Due to Cross-Cathode Effect [J]. VACUUM, 2021, 58(3): 51-54. |
| [14] | WANG Zi-lu, HAO Meng-yi, LI Zhen-xi, LI Jian-jun, HOU Jing-yue. Risk Identification and Precaution of Vacuum Consumable Melting for Titanium Alloys [J]. VACUUM, 2021, 58(3): 71-76. |
| [15] | WU Yan-chao, LIU Yu-yao, LIU Yang, GAO Sheng-yuan, HUANG Mei-dong. Effects of Modulation Ratio on Mechanical Properties of Cr/TiN Nano-multilayers Prepared by Arc Ion Plating [J]. VACUUM, 2021, 58(2): 10-14. |
|
||